제품의 형상 명세(GPS) — 치수 측정기 — 제1부: 캘리퍼스; 설계 및 계측 특성
几何产品规格（GPS） - 尺寸测量设备 - 第1部分:卡钳;设计和计量特征

2014-07-17

제품의 형상 명세(GPS) —치수 계측 장비 — 제1부: 길이 사이즈 일반 한계 게이지
几何产品规格（gps） - 尺寸测量设备 - 第1部分:线性尺寸的极限量规

2020-11-10

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size
几何产品规格（GPS） - 尺寸测量设备 - 第1部分:线性尺寸的平面极限量规

2015-10-26

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Design and metrological characteristics of callipers
产品几何技术规范（GPS）尺寸测量设备第1部分:卡尺的设计和计量特性

2019-08-21

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015)
几何产品规格（GPS） - 尺寸测量设备 - 第1部分:线性尺寸的平面极限量程（ISO 1938-1:2015）

2015-11-18

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)
几何产品规格（GPS） - 坐标测量机（CMM）:确定测量不确定度的技术 - 第1部分:概述和计量特征（ISO/TS 15530-1:2013）

2013-09-04

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges
几何产品规范（GPS）.尺寸测量设备.第2部分:卡尺深度计的设计和计量特性

2020-05-13

Geometrical product specification (GPS) - Dimensional measuring equipment: Optoelectronic measurement of length - Part 2: Design characteristics and metrological characteristics for backward scattering measuring principles
几何产品规范（GPS）.尺寸测量设备:光电长度测量.第2部分:后向散射测量原理的设计特性和计量特性

2021-07-01

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Design and metrological characteristics of calliper depth gauges (ISO 13385-2:2020)
产品几何技术规范（GPS）尺寸测量设备第2部分:卡尺深度计的设计和计量特性

2020-05-27

제품의 형상 명세(GPS) — 가공물과 측정장비의 측정에 의한 검사 —제1부: 규격과의 적합성 또는 부적합성 검증을 위한 결정 규칙
几何产品规格（GPS） - 通过测量工件和测量设备进行检查 - 第1部分:用于验证符合性或不符合规格的决定规则

2020-12-31

Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
几何产品规格（GPS） - 通过测量工件和测量设备进行检查 - 第1部分:用于验证符合性或不符合规格的决定规则

2017-10-31

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification - Technical Corrigendum 1 (ISO 14253-2:2011/Cor 1:2013)
几何产品规格（GPS） - 通过测量工件和测量设备进行检查 - 第2部分:GPS测量中不确定度估算 测量设备校准和产品验证的指导 - 技术更正1（ISO 14253-2:2011/Cor 1:2013）

2013-07-24

Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017)
几何产品规格（GPS） - 通过测量工件和测量设备进行检查 - 第1部分:验证符合性或不符合规格的决定规则（ISO/DIS 14253-1:2016）

2017-12-06

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001/Cor 1:2007)
几何产品规格（GPS） - 坐标测量机（CMM）的验收和再验证测试 - 第6部分:计算高斯相关特征中的误差估计（ISO 10360-6:2001/Cor 1:2007）

2008-09-17