EN 3-8:2021-便携式灭火器 - 第8部分:符合En 3-7要求的最大允许压力等于或低于30巴的灭火器的结构耐压和机械测试要求-国家数字标准馆

现行 EN 3-8:2021

到馆阅读

收藏跟踪

购买正版

Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7 便携式灭火器 - 第8部分:符合En 3-7要求的最大允许压力等于或低于30巴的灭火器的结构耐压和机械测试要求

发布日期： 2021-08-18

实施日期： 2021-08-18

就压力风险而言，本文件规定了符合EN 3-7:2004+A1:2007要求的金属体便携式灭火器的设计、型式试验、制造和检验控制规则。
EN 3的本部分适用于最大允许压力PS小于或等于30 bar且含有非爆炸性、非易燃、无毒和非氧化液体的便携式灭火器。
本文件也适用于金属推进剂气瓶的标记（见附录E）。
本文件不适用于二氧化碳灭火器。

This document specifies, as far as the pressure risk is concerned, the rules of design, type testing, fabrication and inspection control of portable fire extinguishers with a metallic body which comply with the requirements of EN 3-7:2004+A1:2007.
This part of EN 3 applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids.
This document also applies to the marking of metallic propellant gas cartridges (see Annex E).
This document does not apply to carbon dioxide fire extinguishers.

分类信息

发布单位或类别：国际组织-欧洲标准化委员会

CCS分类： C84医药、卫生、劳动保护 - 消防 - 消防设备与器材

ICS分类： 13.220.20消防 - 防火

关联关系

研制信息

归口单位： CEN/TC 70-

相似标准/计划/法规

Portable fire extinguishers-Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
便携式灭火器第8部分:符合EN 3-7要求的最大允许压力等于或低于30 bar的灭火器的结构、耐压和机械试验要求

Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistance and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 3-7
便携式灭火器.第8部分:符合EN 3-7要求的最大允许压力等于或低于30巴的灭火器的结构、耐压和机械试验要求；德语版本EN 3-8:2021

UNE-EN 3-8-2007

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
便携式灭火器.第8部分:EN 3-7对最大允许压力等于或低于30bar的灭火器的结构、耐压性和机械试验的附加要求

Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
移动式灭火器 - 第2部分:灭火器的施工耐压和机械试验要求最大允许压力等于或低于30巴符合EN 1866-1

Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
移动式灭火器.第2部分:符合EN 1866-1要求的最大允许压力等于或低于30巴的灭火器的结构、耐压和机械试验要求；德文版EN 1866-2:2014

2009/111/EC: Commission Decision of 10 February 2009 on the publication of the reference of standard EN 3-8:2006 Portable fire extinguishers — Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar in accordance with Directive 97/23/EC concerning pressure equipment (notified under document number C(2009) 739) (Tex
2009/111/EC:2009年2月10日委员会关于发布标准EN 3-8:2006便携式灭火器-第8部分:EN 3-7施工附加要求的决定根据关于压力设备的指令97/23/EC（根据文件编号C（2009）739通知）（Tex）对最大允许压力等于或低于30 bar的灭火器进行耐压和机械试验

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统