现行

AS 2888.3-2002

Methods of testing plastics waste fittings, Method 3: Methods for pressure testing of plastics waste fittings
塑料废料配件的试验方法 方法3:塑料废料配件的压力试验方法

2002-06-17

现行

AS 2888.4-2002

Method of testing plastics waste fittings, Method 4: Method for air pressure/vacuum testing of plastics waste fittings
塑料废料配件的试验方法 方法4:塑料废料配件的气压/真空试验方法

2002-06-17

现行

AS 2888.9-2002

Methods of testing plastics waste fittings, Method 9: Method for determining residual stress in plastics waste fittings
塑料废料配件的试验方法 方法9:塑料废料配件中残余应力的测定方法

2002-06-17

现行

AS 2888.7-2002

Methods of testing plastics waste fittings, Method 7: Method for testing the seal of plastics waste outlets
塑料废料配件的试验方法 方法7:塑料废料出口密封性试验方法

2002-06-17

现行

AS 2888.6-2002

Methods of testing plastics waste fittings, Method 6: Method for load testing of plastics waste outlets
塑料废料配件的试验方法 方法6:塑料废料出口的负载试验方法

2002-06-17

现行

AS 2888.10-2002

Methods of testing plastics waste fittings, Method 10: Method for leak testing plastics pan connectors
塑料废料配件的试验方法 方法10:塑料盘连接器泄漏试验方法

2002-06-17

现行

AS 2888.2-2002

Methods of testing plastics waste fittings, Method 2: Method for determining dimensions
塑料废料配件的试验方法 方法2:尺寸测定方法

2002-06-17

现行

AS 2888.5-2002

Methods of testing plastics waste fittings, Method 5: Trap seal test
塑料废料配件的试验方法 方法5:陷阱密封试验

2002-06-17

现行

AS 2888.11-2002

Methods of testing plastics waste fittings, Method 11: Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type)
塑料废料配件的试验方法 方法11:塑料伸缩废料连接器（橡胶环接头型）的循环试验方法

2002-06-17

现行

AS 2888.0-2002

Methods of testing plastics waste fittings, Part 0: Introduction and list of methods
塑料废料配件的试验方法第0部分:介绍和方法清单

2002-06-17

现行

AS/NZS 1462.8-2008

Methods of test for plastics pipes and fittings, Method 8: Method of testing the leaktightness of assemblies
塑料管道和配件的试验方法 方法8:组件密封性试验方法

2008-06-30

现行

AS 2331.4.5-2001

Methods of test for metallic and related coatings, Method 4.5: Physical tests - Electroplated plastics - Thermal cycling tests
金属和相关涂层的试验方法 方法4.5:物理试验-电镀塑料-热循环试验

2001-11-23

现行

DIN EN 12119

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
塑料管道系统.聚乙烯（PE）阀门.耐热循环试验方法；德文版EN 12119:1997

1997-08-01

现行

BS EN 12119-1997

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling
塑料管道系统 聚乙烯（PE）阀门 耐热循环试验方法

1997-12-15

现行

UNE-EN 12119-1997

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING.
塑料管道系统 聚乙烯（PE）阀门 耐热循环的试验方法

1997-11-26

现行

AS 2888.1-2002

Methods of testing plastics waste fittings, Method 1: Method of determining the suitability of connection threads of BSP form
塑料废料配件的试验方法 方法1:BSP型连接螺纹适用性的测定方法

2002-06-17

现行

ISO 19892-2011

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling
塑料管道系统——冷热水用热塑性塑料管和配件——接头耐压力循环的试验方法

2011-10-21

现行

BS EN ISO 19892-2018

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法

2018-10-11

现行

BS ISO 19892-2011

Plastics piping systems. Thermoplastics pipes and fittings for hot and cold water. Test method for the resistance of joints to pressure cycling
塑料管道系统 冷热水用热塑性塑料管及配件 接头耐压力循环的试验方法

2011-11-30

现行

GOST R ISO 19892-2021

Трубопроводы из пластмасс. Трубы и фитинги из термопластов для горячей и холодной воды. Метод испытания соединений на стойкость к циклическому изменению давления
塑料管道系统 冷热水用热塑性塑料管和配件 接头耐压力循环的试验方法