液化天然气用不锈钢焊接钢管
Welded stainless steel pipes for liquefied natural gas

2016-08-29

液化天然气用不锈钢无缝钢管
Seamless stainless steel pipes for liquefied natural gas

2020-06-02

石油天然气工业 不锈钢内衬玻璃钢复合管
Petroleum and natural gas industries-Stainless steel lined fiberglass pipes

2013-11-28

Gas Tugsten ARC Welding of Austenitic Stainless Steel Pipe/Plate
奥氏体不锈钢管/板的气体保护电弧焊

2018-08-15

Road vehicles. Liquefied natural gas (LNG) fuel system components-Rigid fuel line in stainless steel
公路车辆 液化天然气（LNG）燃料系统部件

2021-06-11

液化天然气（LNG）全容式钢制内罐组焊技术规范
Technical specification of assembling and welding for the steel inner tank of full containment tanks for the storage of liquefied natural gas

2017-04-12

奥氏体-铁素体型双相不锈钢焊接钢管 第3部分：油气输送用管
Welded austenitic-ferritic(duplex) stainless steel tubes and pipes—Part 3: Pipes for oil and gas transmission

2024-04-25

Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 10: Rigid fuel line in stainless steel
道路车辆 - 液化天然气（LNG）燃料系统组件 - 第10部分:不锈钢刚性燃油管路

2021-06-04

Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的钨极气体保护焊标准焊接工艺规范（WPS） 厚 ER3XX 焊接状态 主要用于管道应用

2001-10-31

Standard Welding Procedure Spec (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 in. Thick, ER3XX, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸奥氏体不锈钢（M-8/P-8/S-8 第1组）的气体保护钨极电弧焊后的标准焊接工艺规范（WPS） 厚 ER3XX ER3XX-XX 焊接状态 主要用于管道应用

2001-03-01

Gas Tungsten Arc Welding With Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）自耗镶块根部的钨极气体保护焊 IN3XX和ER3XX 焊接状态 主要用于管道应用

2001-10-31

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢（S-8）钨极气体保护焊的海军应用标准焊接工艺规范（SWPS-N）

2016-01-01

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
1/8英寸[3 mm]至1-1/2英寸[38 mm]厚、MIL-3XX、焊态主要用于海军应用的奥氏体不锈钢（S-8）钨极气体保护焊的海军应用标准焊接工艺规范（SWPS-N）

2016-01-01

Gas Tungsten Arc Welding With Consumable Insert Root Followed by Shieded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
焊接状态下 1/8至1-1/2英寸厚、IN3XX和ER3XX的奥氏体不锈钢（M-8/P-8/S-8 第1组）的自耗镶块根部钨极气体保护焊 然后进行屏蔽金属极电弧焊 主要用于管道应用

2001-10-31

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊接状态下 采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊接状态下 采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applicati
用碳钢（M-1/P-1/S-1 第1或2组）自耗镶块根部与奥氏体不锈钢（M-8/P-8/S-8 第1组）进行钨极气体保护焊的标准焊接工艺规范（SWPS） 1/16至1-1/2英寸厚 IN309和ER309（L） 焊态 主要用于管道应用