1.1 本试验方法旨在确定固化或未固化的粘合剂材料是否对金属具有腐蚀性。这是一种通用的测试方法，旨在筛选出有明显腐蚀迹象的材料。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《国际标准、指南和建议制定原则决定》中确立的国际公认标准化原则制定的。 =====意义和用途====== 5.1 该测试方法是一种主观测试，因为腐蚀性程度的确定是基于对绿色变色或其他腐蚀迹象的目视检查。

1.1 This test method is intended to determine whether an adhesive material, cured or uncured, is corrosive to a metal. It is a general test method intended to screen out those materials that give a visible sign of corrosion. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test method is a subjective test in that determinations of degree of corrosivity is based upon a visual inspection for a green discoloration or other evidence of corrosion.