1.1 本规程涵盖了用于战术掩体的粘接、铝面泡沫芯夹芯板制造的材料、工艺和质量控制。 1.2 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 在结构单元中形成可再生、耐用的粘合剂需要在粘合过程中非常小心地执行步骤。经验表明，按照本规程进行的粘合剂粘接可产生可复制的粘合剂。本规程适用于类型1和160 华氏度（71 °C）和类型2200 华氏度（93 °C），高湿度服务类型的泡沫和梁遮蔽物。

1.1 This practice covers the materials, processes, and quality controls to be used in the manufacture of adhesive-bonded, aluminum-faced, foam core sandwich panels for tactical shelters. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 The formation of reproducible, durable adhesive bonds in structural units requires great care in the performance of the steps in the bonding process. Experience has shown that adhesive bonding carried out in accordance with this practice produces reproducible adhesive bonds. This practice is applicable to both the Type 1, 160 °F (71 °C), and Type 2, 200 °F (93 °C), elevated humidity service type of foam and beam shelter.