现行

GB/T 26978-2021

现场组装立式圆筒平底钢质低温液化气储罐的设计与建造
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of cryogenic liquefied gas

2021-12-31

现行

BS EN 14015-2004

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
环境温度及以上液体储存用现场建造的立式圆柱形平底地上焊接钢制储罐的设计和制造规范

2005-02-11

现行

DIN EN 14015

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
环境温度及以上液体储存用现场建造的立式圆柱形平底地上焊接钢制储罐的设计和制造规范；德文版EN 14015:2004

2005-02-01

现行

UNE-EN 14015-2005

Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
环境温度及以上液体储存用现场建造的立式圆柱形平底地上焊接钢制储罐的设计和制造规范

2005-09-07

现行

GOST R 58031-2017

Емкости стальные встроенные, вертикальные, цилиндрические с плоским дном, сварные, устанавливаемые над поверхностью для хранения жидкостей при температуре окружающей среды и выше. Правила проектирования и производства
现场建造 立式 圆柱形 平底 地上 焊接 钢制储罐 用于在环境温度及以上条件下储存液体 设计和制造规则

现行

GOST R 58029-2017

Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С ДО -165 °С. Часть 4. Изоляционные компоненты
设计和制造现场建造 垂直 圆柱形 平底钢罐 用于存储工作温度在0 $ 0DC至-165 $ 0DC之间的冷冻液化气体 绝缘部件

现行

UNE-EN 14620-1-2008

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第1部分:总则

2008-06-11

现行

GOST R 58027-2017

Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С ДО -165 °С. Часть 1. Общие положения
工作温度在0°C至-165°C之间的冷藏液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造 第1部分 总则

现行

DIN EN 14620-4

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
用于储存工作温度在0°C至-165°C之间的冷冻液化气体的现场建造立式圆柱形平底钢罐的设计和制造.第4部分:绝缘部件；德文版EN 14620-4:2006

2006-12-01

现行

UNE-EN 14620-2-2008

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第2部分:金属部件

2008-04-23

现行

UNE-EN 14620-4-2008

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 4: Insulation components
工作温度在0°C至-165°C之间的冷冻液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造第4部分:绝缘部件

2008-10-29

现行

UNE-EN 14620-3-2008

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第3部分:混凝土构件

2008-10-29

现行

GOST R 58028-2017

Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сниженных газов с рабочей температурой от 0° С до -165° С. Часть 3. Компоненты бетона
工作温度在0°C至-165°C之间的冷藏液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造 第3部分 混凝土成分

现行

GOST R 58032-2017

Проектирование и производство на месте вертикальных цилиндрических стальных емкостей с плоским дном для хранения охлажденных сжиженных газов с рабочей температурой от 0 °С до -165 °С. Часть 2. Металлоконструкции
工作温度在0°C至-165°C之间的冷藏液化气体储存用现场建造的立式圆柱形平底钢罐的设计和制造 第2部分 金属结构

现行

DIN EN 14620-1

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 1: General
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第1部分:总则；德文版EN 14620-1:2006

2006-12-01

现行

DIN EN 14620-2

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components
用于储存工作温度在0°C至-165°C之间的冷冻液化气体的现场建造立式圆柱形平底钢罐的设计和制造.第2部分:金属部件；德文版EN 14620-2:2006

2006-12-01

现行

DIN EN 14015-DRAFT

Draft Document - Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above; German and English version prEN 14015:2017
文件草案——环境温度及以上液体储存用现场建造的立式圆柱形平底地上焊接钢制储罐的设计和制造规范；德文版和英文版prEN 14015:2017

2017-12-01

现行

DIN EN 14620-3

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 3: Concrete components
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第3部分:混凝土构件；德文版EN 14620-3:2006

2006-12-01

现行

UNE-EN 14620-5-2008

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C. Part 5: Testing, drying, purging and cool-down
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第5部分:试验、干燥、吹扫和冷却

2008-10-29

现行

DIN EN 14620-5

Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 5: Testing, drying, purging and cool-down
现场建造的立式圆柱形平底钢制储罐的设计和制造 用于储存工作温度在0°C至-165°C之间的冷冻液化气体 第5部分:试验、干燥、吹扫和冷却；德文版EN 14620-5:2006

2006-12-01