Hydraulic fluid power — Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm — Accessory mounting dimensions
液压流体动力——单杆气缸 16兆帕（160巴）紧凑型系列 孔从250毫米到500毫米——附件安装尺寸
发布日期：
2008-02-27
ISO 13726:2008规定了符合ISO 6020-3的16 MPa（160 bar）紧凑型气缸附件互换性所需的安装尺寸。附件专门设计用于根据ISO 6020-3制造的气缸，但这并不限制其应用。
ISO 13726:2008涵盖以下附件:
AP2-杆u形夹，内螺纹（见图1和表1）；
AP4-杆眼，普通，内螺纹（见图2和表2）；
AA4-L-枢轴销（锁定板）（见图3和表3）；
用于枢轴销的AL6锁定板（见图4和表4）；
AA4-S-普通枢轴销（参见图5和表5）。
ISO 13726:2008 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-3, but this does not limit their application.
ISO 13726:2008 covers the following accessories:
AP2 – rod clevis, female thread (see Figure 1 and Table 1);
AP4 – rod eye, plain, female thread (see Figure 2 and Table 2);
AA4 – L – pivot pin (locking plate) (see Figure 3 and Table 3);
AL6 – locking plate for pivot pin (see Figure 4 and Table 4);
AA4 – S – plain pivot pin (see Figure 5 and Table 5).
到馆阅读
收藏跟踪
分享链接
购买正版
分类信息
首页
馆藏资源
舆情信息
标准服务
科研活动
关于我们
️版权归中国标准化研究院所有