给出了E型玻璃套管的要求，该玻璃套管采用编织或针织结构，具有基于聚氯乙烯（PVC）或其共聚物或混合物的连续柔性涂层。已发现这些套管适用于105°C以下的温度。 套管的内径通常在0.3 mm到25 mm之间，通常有以下颜色:黑色、白色、红色、黄色、蓝色、棕色、绿色、灰色、橙色、粉色和绿色/黄色。 除本标准中特别列出的尺寸或颜色外，其他尺寸或颜色可作为定制项目提供。 如果这些项目符合表2和表5中列出的其他性能要求，则应视为符合本标准，但尺寸和（如适用）表3中的要求除外。 符合本规范的材料符合既定的性能水平。然而，用户为特定应用选择材料时，应基于该应用中充分性能所需的实际要求，而不是仅基于本规范。 本版本经过调整，以反映对IEC 60684第二版所做的更改- 2.试验方法，并在100 mm长的电极上标准化击穿电压。

Gives the requirements for E-type glass sleeving using either braided or knitted construction with a continuous flexible coating based on polyvinyl chloride (PVC) or its copolymers or blends thereof. These sleevings have been found suitable up to temperatures of 105 °C. The sleeving is normally available with internal diameters between 0,3 mm and 25 mm and is normally supplied in the following colours : black, white, red, yellow, blue, brown, green, grey, orange, pink and green/yellow. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the other property requirements listed in Tables 2 and 5, except for dimensions, and, where applicable, in Table 3. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This edition has been aligned to reflect the changes made to the 2nd edition of IEC 60684-2, Test methods, and standardizes on a 100 mm long electrode for breakdown voltage.