BS EN 16798-5-1:2017涵盖了机械通风和空气调节的能源性能计算 空调系统，包括加湿和除湿。它考虑了 发电（空气处理机组）和配电（管道系统）部件。它包括一个简化的计算 绝热冷却系统。它不包括排放部分（所需体积的计算 流量和/或送风条件），见EN 16798-7。它不包括 加热/冷却发电量的计算。该方法主要用于大规模定制通风和通风 空调系统，通常用于商业建筑，但其应用并非如此 基于建筑或空间使用类型的限制。一种具有综合供暖/制冷发电的通风系统的计算方法，包括 使用月度或季节性计算间隔或bin方法的生活热水发电是可行的 在单独的标准EN 16798-5-2中提供。该方法不包括加湿和干燥 除湿或绝热冷却。表1显示了本标准在环境保护局标准中的相对位置 EN ISO 52000中规定的模块化结构- 1.注1在CEN ISO/TR 52000-2中，可以找到相同的表格，每个模块的编号如下: 已发布或正在编制的相关EPB标准和随附技术报告。注2:模块代表EPB标准，尽管一个EPB标准可能涵盖多个模块 一个模块可能包含在一个以上的EPB标准中，例如一个简化和详细的方法 分别地另见第2条和表A.1和B.1。交叉引用:EN 13053:2006EN 12237:2003EN 13141-8:2014EN 14239:2004EN 16798-7:2017EN 13141-7:2010EN ISO 5801（ISO 5801:2007）ASEN ISO 7345: 1995ISO 52000-1:2017EN ISO 52000-1:2017ISO 7345:1987EN 12792:2003ISO 5801:2007 Ed 2CEN/TR 16798-6:2017EN 1886:2007EN 1507:2006 CEN ISO/TR 52000-2ISO 52000-2ENISO 52010-1CEN/TS 16628:2014EN 16798-9:2017ENISO 52016-1EN 16798-5-2:2017EN 15316-1:2017ISO 52016-1:2017ISO 52016-1:2017CEN/TS 16629:2014ISO 52010-1:2017CEN/TS 16629购买本文件时，所有当前的修改件都包括在内。

BS EN 16798-5-1:2017 covers the energy performance calculation of mechanical ventilation and air conditioning systems, including humidification and dehumidification. It takes into account the generation (air handling unit) and distribution (duct system) parts. It includes a simplified calculation of adiabatic cooling systems. It does not cover the emission part (calculation of the required volume flow rates and/or supply air conditions), which is covered in EN 16798-7. It does not include the calculation of heating/cooling generation. This method is focussed on large customized ventilation and air conditioning systems, typically used in commercial buildings, although the application is not restricted on the basis of building or space use type.A calculation method for ventilation systems with integrated heating/cooling generation, including domestic hot water generation, using a monthly or seasonal calculation interval or a bin method, is provided in a separate standard, EN 16798-5-2. This method does not include humidification and dehumidification or adiabatic cooling.Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.NOTE 1 In CEN ISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2 The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.Cross References:EN 13053:2006EN 12237:2003EN 13141-8:2014EN 14239:2004EN 16798-7:2017EN 13141-7:2010EN ISO 5801 (ISO 5801:2007) ASEN ISO 7345:1995ISO 52000-1:2017EN ISO 52000-1:2017ISO 7345:1987EN 12792:2003ISO 5801:2007 Ed 2CEN/TR 16798-6:2017EN 1886:2007EN 1507:2006 CEN ISO/TR 52000-2ISO 52000-2ENISO 52010-1CEN/TS 16628:2014EN 16798-9:2017ENISO 52016-1EN 16798-5-2:2017EN 15316-1:2017ISO 52016-1:2017ISO 52010-1:2017CEN/TS 16629:2014All current amendments available at time of purchase are included with the purchase of this document.