1.1 本试验方法包括通过火试金收集和重量测量测定活性炭中的金。范围为15 μg/g至5000 μg/g金。 1.2 单位- 以国际单位制表示的数值应视为标准。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的危险声明，请参阅第节 9 , 11.2.3 – 11.2.5 和 11.3.4 . 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 在选矿工业用于含金矿石的初级冶金过程中，金用碱性氰化物溶液萃取，并吸附在活性炭上以回收金属。这类选矿厂的冶金核算、过程控制和矿石评估程序取决于对活性炭中金浓度的准确、准确和及时测量。 5.2 本活性炭中金的测试方法主要用于测试此类材料的金属含量。假设使用这些程序的人将是经过培训的分析员，能够熟练、安全地执行常见的实验室程序。预计工作将在配备适当的实验室进行，并遵循适当的废物处理程序。必须遵循适当的质量控制实践，如指南中所述 E882 .

1.1 This test method covers the determination of gold in activated carbon by fire assay collection and gravimetric measurement. It covers the range of 15 μg/g to 5000 μg/g gold. 1.2 Units— The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Section 9 , 11.2.3 – 11.2.5 , and 11.3.4 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 In the primary metallurgical processes used by the mineral processing industry for gold bearing ores, gold is extracted with alkaline cyanide solutions and adsorbed onto activated carbon for recovery of the metal. Metallurgical accounting, process control, and ore evaluation procedures for this type of mineral processing plant depend on accurate, precise, and prompt measurements of gold concentrations in the activated carbon. 5.2 This test method for gold in activated carbon is intended primarily as a referee method to test such materials for metal content. It is assumed that those who use these procedures will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices must be followed, such as those described in Guide E882 .