BS EN 12566-6:2016规定了产品的要求、试验方法、合格评定和标记 用于处理化粪池污水的预制二级处理装置 符合EN 12566-1或EN 12566-4标准，适用于高达50 PT的小型废水处理系统。注:等效化粪池污水可能来自现有化粪池。它适用于预制的二级处理装置，其所有组件由一家制造商包装或现场组装，并作为一个套件投放市场。预制二级处理装置由一个或多个由混凝土、钢和混凝土制成的储罐组成， 未增塑聚氯乙烯（PVC）- U） 聚乙烯（PE）、玻璃纤维增强聚酯（GRP-UP）， 聚丙烯（PP）、聚双环戊二烯（PDCPD）或由柔性板（HDPE、PP、， 聚氯乙烯（PVC）、三元乙丙橡胶（EPDM）。制造商规定的其他部件，如管道、泵和过滤材料 将被视为该单元的一部分。本欧洲标准规定了预制二级处理装置的性能 需要验证其是否适用于规定试验方法的最终使用条件。本欧洲标准适用于包装和/或现场组装的二级处理装置 在地面顶部（建筑物外）或埋在没有车辆荷载的地面上使用 适用于该单位。本欧洲标准不包括:直接渗入地面的非水密二级处理装置；改装套件（见3.1.7中的定义）。1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ISO 5664ISO 6060ISO 6778ISO 7150-1ISO 15705EN ISO7899-1ISO 7899-1EN ISO 7899-2ISO 7899-2EN ISO 9308-1ISO 9308- 1EN ISO 9308-3ISO 9308-3EN 1992-1-1EN 1993-1-1购买时可用的所有现行修订版均包含在本文件的购买中。

BS EN 12566-6:2016 specifies requirements, test methods, evaluation of conformity and marking for prefabricated secondary treatment units used for the treatment of effluent from septic tanks according to EN 12566-1 or EN 12566-4 in small wastewater treatment systems for up to 50 PT.NOTE Equivalent septic effluent may come from existing septic tanks.It applies to the prefabricated secondary treatment unit, where all its components are packaged or site assembled and placed on the market as a kit by one manufacturer.The prefabricated secondary treatment unit consists of one or more tanks made of concrete, steel, unplasticised polyvinylchloride (PVC-U), polyethylene (PE), glass reinforced polyester (GRP-UP), polypropylene (PP), polydicyclopentadiene (PDCPD) or container made of flexible sheets (HDPE, PP, PVC, EPDM). Other components specified by the manufacturer, such as pipes, pumps and filter material will be considered as part of the unit.This European Standard establishes the performance of the prefabricated secondary treatment units needed to verify their suitability for the end use conditions for which the test methods are specified.This European Standard applies for the packaged and/or site assembled secondary treatment units for use on the top of the ground (outside the building) or buried in the ground where no vehicle loads are applied to the unit.This European Standard does not cover:non watertight secondary treatment units with direct infiltration into the ground;retrofit kits (see definition in 3.1.7).Cross References:EN 16323:2014EN 12566-1EN 12566-3:2016EN 12566-4EN 13501-1305/2011/EUEN 476EN ISO 9001ISO 9001EN 872EN 1899-1ISO 5815:1989EN 12260EN 25663ISO 5663EN ISO 6878ISO 6878EN ISO 10304-1ISO 10304-1EN ISO 11732ISO 11732EN ISO 11885ISO 11885EN ISO 11905-1ISO 11905-1EN ISO 13395ISO 13395EN ISO 14911ISO 14911EN ISO 15681-2ISO 15681-2ISO 5664ISO 6060ISO 6778ISO 7150-1ISO 15705EN ISO 7899-1ISO 7899-1EN ISO 7899-2ISO 7899-2EN ISO 9308-1ISO 9308-1EN ISO 9308-3ISO 9308-3EN 1992-1-1EN 1993-1-1All current amendments available at time of purchase are included with the purchase of this document.