现行

BS EN 917-1997

Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness
塑料管道系统 热塑性塑料阀门 耐内压和密封性试验方法

1997-07-15

现行

UNE-EN 917-1997

PLASTICS PIPING SYSTEMS. THERMOPLASTICS VALVES. TEST METHODS FOR RESISTANCE TO INTERNAL PRESSURE AND LEAKTIGHTNESS.
塑料管道系统 热塑性塑料阀门 耐内压和密封性的试验方法

1997-06-18

现行

DIN EN 917

Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
塑料管道系统.热塑性塑料阀门.耐内压和密封性试验方法；德文版EN 917:1997

1997-03-01

现行

BS EN ISO 13259-2020

Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
地下无压应用的热塑性塑料管道系统 弹性密封环型接头密封性的试验方法

2020-08-13

现行

GOST R ISO 13845-2020

Трубопроводы из пластмасс. Раструбные соединения с эластомерным уплотнительным кольцом для напорных труб из термопластов. Метод испытания на герметичность при отрицательном давлении и угловом смещении
塑料管道系统 热塑性压力管用弹性密封环式承插接头 内压和角偏转下密封性的试验方法

现行

GOST R ISO 3458-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод испытания на герметичность под внутренним давлением
塑料管道系统 配件和压力管道之间的机械接头 内压密封性试验方法

现行

KS M ISO 3458

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

2019-12-31

现行

BS 09/30198202 DC

BS ISO 13259. Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
BS ISO 13259 地下无压应用的热塑性塑料管道系统 弹性密封环型接头密封性的试验方法

2009-03-05

现行

EN ISO 13259-2020

Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
地下无压应用的热塑性塑料管道系统弹性密封环式接头密封性的试验方法（ISO 13259-2020）

2020-07-29

现行

BS EN ISO 13845-2015

Plastics piping systems. Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes. Test method for leaktightness under internal pressure and with angular deflection
塑料管道系统 与热塑性压力管道一起使用的弹性密封圈型承插接头 内压和角位移下密封性的试验方法

2015-02-28

现行

KS M ISO 13846(2017 Confirm)

플라스틱 파이프 시스템－열가소성 수지 압력관용 말단 하중 베어링/비 말단 하중 베어링 조립품 및 연결구－내부 수압 하에서 장기 수밀 시험방법
塑料管道系统热塑性压力管道的端部承载和非端部承载组件和接头内水压力下长期密封性试验方法

2012-12-13

现行

KS M ISO 13846(2022 Confirm)

플라스틱 파이프 시스템－열가소성 수지 압력관용 말단 하중 베어링/비 말단 하중 베어링 조립품 및 연결구－내부 수압 하에서 장기 수밀 시험방법
塑料管道系统－热塑性压力管道的端部承载和非端部承载组件和接头－内水压力下长期密封性试验方法

2012-12-13

现行

EN ISO 13845-2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)
塑料管道系统 - 用于热塑性压力管道的弹性密封环型插座接头 - 内部压力和角度偏转下的密封性测试方法（ISO 13845:2015）

2015-02-18

现行

EN ISO 13846-2000

Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure (ISO 13846:2000)
塑料管道系统 - 用于热塑性塑料压力管道的端部承载和非端部承载组件和接头 - 内部水压下长期密封性的测试方法（ISO 13846:2000）

2000-10-01

现行

EN 1680-1997

Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
塑料管道系统 - 聚乙烯（PE）管道系统的阀门 - 弯曲应用于操作机构和弯曲后的密封性的测试方法

1997-01-22

现行

UNE-EN 911-1996

PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure.
塑料管道系统 热塑性压力管道用弹性密封环式接头和机械接头 外部静水压力下密封性的试验方法

1996-05-10

现行

KS M ISO 1167-1(2019 Confirm)

유체이송용 열가소성 플라스틱관, 이음관 및 조립품 — 내압저항성의 평가 — 제1부: 일반 방법
用于输送流体的热塑性塑料管道 配件和组件 - 耐内压性的测定 - 第1部分:一般方法

2014-10-23

现行

ISO 13846-2000

Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure
塑料管道系统——热塑性压力管道的端部承载和非端部承载组件和接头——内部水压下长期密封性的试验方法

2000-10-19

现行

UNE-EN ISO 13846-2001

Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure. (ISO 13846:2000)
塑料管道系统.热塑性压力管道用端部承载和非端部承载组件和接头.内水压力下长期密封性试验方法 （ISO 13846-2000）

2001-10-30

现行

UNE-EN 715-1994

THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING JOINTS BETWEEN SMALL DIAMETER PRESSURE PIPES AND FITTING. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST.
热塑性塑料管道系统 小直径压力管道和配件之间的端部承载接头 内部水压下密封性的试验方法 包括端部推力

1994-11-24