AS 1289.6.1.1:2014-工程用土壤试验方法方法6.1.1:土壤强度和固结试验-土壤加州承载比的测定-重塑试样的标准实验室方法-国家数字标准馆

现行 AS 1289.6.1.1:2014

到馆提醒

收藏跟踪

购买正版

Methods of testing soils for engineering purposes, Method 6.1.1: Soil strength and consolidation tests - Determination of the California Bearing Ratio of a soil - Standard laboratory method for a remoulded specimen 工程用土壤试验方法方法6.1.1:土壤强度和固结试验-土壤加州承载比的测定-重塑试样的标准实验室方法

发布日期： 2014-09-30

本标准规定了在实验室压实和测试时，确定土壤加州承载比（CBR）的方法。CBR值是在通过19mm筛子的材料分数上测量的。本标准不适用于19mm筛上残留超过20%的材料。

This Standard sets out a method for determining the California Bearing Ratio (CBR) of a soil when compacted and tested in the laboratory. The CBR value is measured on the fraction of material passing the 19mm sieve. This Standard is not applicable to materials with more than 20% retained on the 19mm sieve.

分类信息

发布单位或类别：澳大利亚-澳大利亚标准

关联关系

研制信息

相似标准/计划/法规

NZS 4402.6.1.1-1986

Methods of testing soils for civil engineering purposes - Soil strength tests - Determination of the California Bearing Ratio (CBR) - Test 6.1.1 Standard laboratory method for remoulded specimens
土木工程用土壤试验方法.土壤强度试验.加州承载比（CBR）的测定.试验6.1.1重塑试样的标准实验室方法

AS 1289.3.5.1-2006[ Pending Revision ]

Methods of testing soils for engineering purposes, Method 3.5.1: Soil classification tests - Determination of the soil particle density of a soil - Standard method
工程用土壤试验方法方法3.5.1:土壤分类试验.土壤颗粒密度的测定.标准方法

Methods of testing soils for civil engineering purposes
土木工程用土壤试验方法

Methods of test for soils for civil engineering purposes
土木工程用土壤的试验方法

AS 1289.3.3.1-2009

Methods of testing soils for engineering purposes, Method 3.3.1: Soil classification tests - Calculation of the plasticity index of a soil
工程用土壤试验方法方法3.3.1:土壤分类试验-土壤塑性指数的计算

NZS 4402.2.7.2-1986

Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.7.2 Method for medium and fine soils
土木工程用土壤试验方法.土壤分类试验.试验2.7.2中细土壤试验方法

AS 1289.3.4.1-2008

Methods of testing soils for engineering purposes, Method 3.4.1: Soil classification tests - Determination of the linear shrinkage of a soil - Standard method
工程用土壤试验方法方法3.4.1:土壤分类试验.土壤线性收缩的测定.标准方法

AS 1289.3.2.1-2009

Methods of testing soils for engineering purposes, Method 3.2.1: Soil classification tests - Determination of the plastic limit of a soil - Standard method
工程用土壤试验方法方法3.2.1:土壤分类试验.土壤塑性极限的测定.标准方法

AS 1289.4.3.1-2021

Methods of testing soils for engineering purposes, Method 4.3.1: Soil chemical tests - Determination of the pH value of a soil - Electrometric method
工程用土壤试验方法方法4.3.1:土壤化学试验土壤pH值的测定电测法

AS 1289.3.3.2-2009

Methods of testing soils for engineering purposes, Method 3.3.2: Soil classification tests - Calculation of the cone plasticity index of a soil
工程用土壤试验方法方法3.3.2:土壤分类试验-土壤锥体塑性指数的计算

AS 1289.1.1-2001[ Pending Revision ]

Methods of testing soils for engineering purposes, Method 1.1: Sampling and preparation of soils - Preparation of disturbed soil samples for testing
工程用土壤试验方法方法1.1:土壤取样和制备-试验用扰动土壤样品的制备

AS 1289.3.9.1-2015

Methods of testing soils for engineering purposes, Method 3.9.1: Soil classification tests - Determination of the cone liquid limit of a soil
工程用土壤试验方法方法3.9.1:土壤分类试验-土壤锥体液限的测定

AS 1289.3.8.2-2008

Methods of testing soils for engineering purposes, Method 3.8.2: Soil classification tests - Dispersion - Determination of the percent dispersion of a soil
工程用土壤试验方法方法3.8.2:土壤分类试验-分散-土壤分散百分比的测定

NZS 4402.2.8.3-1986

Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.3 Standard method for fine soils (pipette method)
土木工程用土壤试验方法.土壤分类试验.试验2.8.3细土的标准方法（移液管法）

NZS 4402.2.8.4-1986

Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.8.4 Subsidiary method for fine soils (hydrometer method)
土木工程用土壤试验方法.土壤分类试验.试验2.8.4细土的辅助方法（比重计法）

흙의 공학적 분류 방법
土工程用途的分类标准方法

KS F 2324(2021 Confirm)

흙의 공학적 분류 방법
工程用土壤分类方法

NZS 4402.2.7.1-1986

Methods of testing soils for civil engineering purposes - Soil classification tests - Test 2.7.1 Method for coarse, medium and fine soils
土木工程用土壤试验方法.土壤分类试验.试验2.7.1粗、中、细土壤试验方法

AS 1289.2.2.1-1998

Methods of testing soils for engineering purposes, Method 2.2.1: Soil moisture content tests - Determination of the total suction of a soil - Standard method
工程用土壤试验方法方法2.2.1:土壤含水量试验.土壤总吸力的测定.标准方法

AS 1289.4.1.1-2019

Methods of testing soils for engineering purposes, Method 4.1.1: Soil chemical tests - Determination of the organic matter content of a soil - Normal method
工程用土壤试验方法方法4.1.1:土壤化学试验-土壤有机质含量的测定-常规方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统