BS EN 61800-7-1:2016规定了动力传动系统（PDS）之间的通用接口 以及控制器中的应用控制程序。通用PDS接口不是特定的 适用于任何特定的通信网络技术。IEC 61800本部分附件 指定不同驱动器配置文件类型到通用PDS接口的映射。IEC 61800本部分中规定的功能不是为了确保功能安全。 这需要根据相关标准、协议和法律采取额外措施。交叉引用:EN 50325-4IEC 61158-5-2EN 61158- 5-2IEC 61158-5-3EN 61158-5-3EN 61158-5-10EN 61158-6-2EN 61158-6-2IEC 61158-6-2EN 61158-6-3EN 61158-6-10EN 61158-6-10IEC 61800-7EN 61800-7IEC 61800-7-201EN 61800-7-201IEC 61800-7-202:2015EN 61800-7-203EN 61800-7-203EN 61800-7-203EN 61800-7-204:2015EN 61800-761158-5-12IEC 61158-5-13EN 61158-5-13IEC 61158-5-14EN 61158-5-16EN 61158-5-16IEC 61158-5-19EN 61158-5-19IEC 61158-5-23EN 61158-5-23IEC 61158-6-12EN 61158-6-12IEC 61158-6-13EN 6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6 6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-19 IEC 616158-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-6-2013IEC 588ISO/IEC7498-2ISO/IEC 7498-3ISO/IEC 19501:2005ISO 157445-1取代BS EN 61800-7-1:2008，该标准仍然有效。购买本文件时，所有当前可用的修订版均包含在购买本文件中。

BS EN 61800-7-1:2016 specifies a generic interface between power drive system(s) (PDS) and the application control program in a controller. The generic PDS interface is not specific to any particular communication network technology. Annexes of this part of IEC 61800 specify the mapping of the different drive profiles types onto the generic PDS interface.The functions specified in this part of IEC 61800 are not intended to ensure functional safety. This requires additional measures according to the relevant standards, agreements and laws.Cross References:EN 50325-4IEC 61158-5-2EN 61158-5-2IEC 61158-5-3EN 61158-5-3IEC 61158-5-10EN 61158-5-10IEC 61158-6-2EN 61158-6-2IEC 61158-6-3EN 61158-6-3IEC 61158-6-10EN 61158-6-10IEC 61800-7EN 61800-7IEC 61800-7-201EN 61800-7-201IEC 61800-7-202:2015EN 61800-7-202:2016IEC 61800-7-203EN 61800-7-203IEC 61800-7-204:2015EN 61800-7-204:2016IEC 61800-7-304EN 61800-7-304IEC/TR 62390:2005IEC 61131-3EN 61131-3IEC 61158EN 61158IEC 61158-5-12EN 61158-5-12IEC 61158-5-13EN 61158-5-13IEC 61158-5-14EN 61158-5-14IEC 61158-5-16EN 61158-5-16IEC 61158-5-19EN 61158-5-19IEC 61158-5-23EN 61158-5-23IEC 61158-6-12EN 61158-6-12IEC 61158-6-13EN 61158-6-13IEC 61158-6-14EN 61158-6-14IEC 61158-6-16EN 61158-6-16IEC 61158-6-19EN 61158-6-19IEC 61158-6-23EN 61158-6-23IEC 61499-1:2012EN 61499-1:2013IEC 61784-1EN 61784-1IEC 61784-2EN 61784-2IEC 61800EN 61800IEC 61800-4:2002EN 61800-4:2003IEC 61800-7-301EN 61800-7-301IEC 61800-7-302EN 61800-7-302IEC 61800-7-303EN 61800-7-303IEC 62026-3EN 62026-3IEC 60050-351:2013IEC 61588ISO/IEC 7498-1ISO/IEC 7498-2ISO/IEC 7498-3ISO/IEC 19501:2005ISO 15745-1Replaces BS EN 61800-7-1:2008 which remains currentAll current amendments available at time of purchase are included with the purchase of this document.