1.1 本规程描述了评估射线照相、超声波和涡流检测仪器和系统的DICONDE合规性的程序。 1.2 本规程未规定考试系统的性能限制；如果需要此类验收标准，则必须由使用方指定。此处暗示的验收标准仅为示例，受客户和最终用户控制文件施加的或多或少的限制。 1.3 待评估的具体参数、测试条件和频率以及所需的报告数据也必须由用户确定。 1.4 本规程可用于评估完整的检查系统，包括搜索单元、仪器、互连、扫描仪固定装置和连接的报警和辅助设备，主要用于重复使用此类系统而不进行更改或替换的情况。 本规程不用于替代检验任何给定材料的仪器或系统的校准或标准化。 1.5 替代程序，如本规程中所述的示例或其他程序，只能在客户批准的情况下使用。 1.6 预计客户将为符合本实践的级别设置要求，包括将功能和DICONDE互操作性结合起来进行测试的要求。 1.7 有两种客户类型可供使用:一种是希望快速评估结果的高级购买者，另一种是希望了解结果范围细节的低级系统开发人员，如第节所述 5. . 1.8 以国际单位制表示的数值应视为标准值。 本标准不包括其他计量单位。 1.9 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.10 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本规程描述了NDE系统制造商和NDE系统购买者评估系统合规性和符合DICONDE标准的推荐程序。 5.2 互连和互操作性的用例如所示 图1 . 图1 两个互操作DICONDE系统上常见SCP和SCU功能的图示

1.1 This practice describes procedures for evaluating DICONDE compliance of radiographic, ultrasonic and eddy current examination instruments and systems. 1.2 This practice establishes no performance limits for examination systems; if such acceptance criteria are required, these must be specified by the using parties. Where acceptance criteria are implied herein they are for example only and are subject to more or less restrictive limits imposed by customer’s and end user’™s controlling documents. 1.3 The specific parameters to be evaluated, conditions and frequency of test, and report data required, must also be determined by the user. 1.4 This practice may be used for the evaluation of a complete examination system, including search unit, instrument, interconnections, scanner fixtures and connected alarm and auxiliary devices, primarily in cases where such a system is used repetitively without change or substitution. This practice is not intended to be used as a substitute for calibration or standardization of an instrument or system to inspect any given material. 1.5 Alternate procedures, such as examples described in this practice, or others, may only be used with customer approval. 1.6 It is expected that the customer sets the requirements for the level to which this practice be conformed, including the requirements for which functionality and DICONDE interoperability be incorporated for testing. 1.7 Two customer types are targeted for usage: a high-level purchaser wishing to quickly assess results and a low-level systems developer wishing to understand the details about the extent of the results, as discussed in Section 5 . 1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This practice describes the recommended procedure for NDE system manufacturers and NDE system purchasers to assess the system’s level of compliance and conformance to the DICONDE standard. 5.2 The use cases for interconnectivity and interoperability are illustrated in Fig. 1 . FIG. 1 Illustration of Common SCP and SCU Functions on Two Interoperating DICONDE Systems