现行

JB/T 12142-2015

美制螺纹复合丝锥
Combined taps for american threads

2015-04-30

现行

GOST 11188-1982

Метчики для метрической резьбы с натягами. Допуски на резьбу
螺纹螺纹用于公制螺纹 螺纹公差

现行

JIS B 4430-1998

Short machine taps and hand taps for metric threads
公制螺纹用短机丝锥和手丝锥

1998-01-01

现行

KS B 3340

미터 보통 나사용 너트 탭
螺母丝锥公制粗牙螺纹

2019-12-13

现行

BS 949-4-1990

Screwing taps-Specification for metric ground thread taps: manufacturing tolerances
旋塞

1990-06-29

现行

ASME B94.9-2008(R2018)

Taps: Ground Thread With Cut Thread Appendix (Inch and Metric Sizes)
丝锥:带切割螺纹附件的磨光螺纹（英制和公制尺寸）

2009-06-30

现行

ASME B94.9-2008(R2023)

Taps: Ground Thread With Cut Thread Appendix (Inch and Metric Sizes)
丝锥:带切割螺纹附件的磨光螺纹（英制和公制尺寸）

2009-06-30

现行

BS 4377-1991

Specification for tapping of holes to receive wire thread inserts (ISO metric threads)
用于安装钢丝螺纹嵌件（ISO公制螺纹）的孔攻丝规范

1991-05-31

现行

DIN 8140-2

Wire thread inserts for ISO metric screw threads - Part 2: Tapped holes for thread inserts, thread tolerances
ISO米制螺纹用钢丝螺纹嵌件.第2部分:螺纹嵌件用螺纹孔.螺纹公差

2005-08-01

现行

DIN 802-6

Tolerances on the threaded portion of taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts according to DIN 8140 for ISO metric coarse and fine pitch threads; Manufacturing tolerances on the threaded portion
丝锥螺纹部分公差的制造.第6部分:DIN 8140中ISO米制粗牙和细牙螺纹用钢丝螺纹嵌件螺纹孔（EG）用磨制丝锥

2003-07-01

现行

DIN 376

Machine screwing taps for coarse pitch metric ISO-threads M1.6 to M68
粗螺距公制ISO螺纹M1用机用丝锥 6至M68

2016-02-01

现行

GOST 29221-1991

Метчики машинные с удлиненным хвостовиком для метрических резьб от М3 до М10. Размеры
从M3到M10的公制螺纹的长柄机械抽头 尺寸

现行

ADS RS727

Tapped Hole and Fitted Size Data for Helical Coil Wire Thread Inserts (Metric)
螺旋线圈钢丝螺纹插入件的螺纹孔和配合尺寸数据（公制）

1976-02-11

现行

SAE AS1421A

Aerospace Selected Diameter - Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads
航空航天选定直径.轴或轴承固定螺纹用公制60°螺纹的节距组合

2010-11-16

现行

ISO 2857-1973

Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距用磨光丝锥——螺纹部分的制造公差

1973-12-01

现行

UNE 16605-1991

GROUND THREAD TAPS FOR ISO METRIC THREADS OF TOLERANCES 4H TO 8H AND 4G TO 6G COARSE AND FINE PITCHES. MANUFACTURING TOLERANCES ON THE THREADED PORTION.
公差为4H至8H和4G至6G的ISO公制粗牙距和细牙距螺纹的磨光丝锥 螺纹部分的制造公差

1991-01-10

现行

ADS RS723

Selected Aerospace Diameter-Pitch Combinations of Metric 60° Screw Threads for Nuts and Bolts
螺母和螺栓用公制60°螺纹的选定航空航天直径节距组合

1973-11-01

现行

DIN 13-50

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
ISO通用米制螺纹.第50部分:成型内螺纹公差等级的组合

2017-05-01

现行

DIN 371

Machine taps with reinforced shank for coarse pitch metric ISO-threads M1 to M10 and fine pitch metric ISO-threads M1 × 0.2 to M10 × 1.25
粗节公制ISO螺纹M1至M10和细节公制ISO螺纹M1×0.2至M10×1.25用带加强柄的机用丝锥

2016-01-01

现行

DIN 2174

Cold-forming taps for ISO metric coarse pitch thread M2 to M39 and ISO metric fine pitch thread M3 × 0.25 to M52 × 4 - Dimensions
ISO公制粗牙螺纹M2至M39和ISO公制细牙螺纹M3×0.25至M52×4用冷成型丝锥.尺寸

2008-11-01