ISO 11093-7:2011-纸和纸板——Corestart 7的测试:用三点法测定弯曲模量 -国家数字标准馆

现行 ISO 11093-7:2011

到馆阅读

收藏跟踪

购买正版

Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method 纸和纸板——Corestart 7的测试:用三点法测定弯曲模量

发布日期： 2011-09-13

ISO 11093-7:20 11规定了通过三点法测定满足以下标准的圆柱形纸和纸板芯的弯曲模量的方法:

内径:50mm至350mm；
最小壁厚:0.05 ×内径，但不小于10.0 mm；
芯的最小长度:10 ×内径，但不小于1 000 mm。

ISO 11093-7:2011 specifies a method for the determination, by the three-point method, of the flexural modulus of cylindrical paper and board cores, which meet the following criteria:
internal diameter: 50 mm to 350 mm;
minimum wall thickness: 0,05 × internal diameter, but not less than 10,0 mm;
minimum length of core: 10 × internal diameter, but not less than 1 000 mm.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 85.060造纸技术 - 纸和纸板

关联关系

研制信息

归口单位： ISO/TC 6

相似标准/计划/法规

KS M ISO 11093-7

종이 및 판지 — 지관 시험 —제7부: 3점법에 의한 굴곡 탄성률 측정
纸和板 - 芯的测试 - 第7部分:通过三点法测定弯曲模量

BS ISO 11093-7-2011

Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
纸和纸板岩心测试

BS ISO 11093-8-2017

Paper and board. Testing of cores-Determination of natural frequency and flexural modulus by experimental modal analysis
纸和纸板岩心测试

KS M ISO 11093-8

종이 및 판지 — 지관 시험 —제8부: 실험적 모드 해석에 의한 고유 진동수 및 굴곡 탄성률 측정
纸和板 - 芯的测试 - 第8部分:通过实验模态分析测定固有频率和弯曲模量

ISO 11093-8-2017

Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
绘制并绘制每瓶命名卷8:样本模块和狗狗频率时态并进行实验分析

UNE 57163-7-2004

Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.
纸和纸板.纸芯试验.第7部分:用三点法测定弯曲强度

GB/T 22906.7-2008

纸芯的测定第7部分：弹性模量的测定（三点法）
Testing of cores - Part 7: Determination of flexural modulus by the three-point method

Paper and board - Testing of cores - Part 10: Determination of surface roughness
纸和纸板.纸芯试验.第10部分:表面粗糙度的测定

BS 11/30246408 DC

BS ISO 11093-8. Paper and board. Testing of cores. Part 8. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8 纸和纸板岩心测试第八部分通过实验模态分析确定固有频率和弯曲模量

KS M ISO 11093-5

종이 및 판지 — 지관 시험 —제5부: 동심 회전 특성 측정
纸和板 - 核心测试 - 第5部分:同心旋转特性的确定

KS M ISO 11093-9

종이 및 판지 — 지관 시험 — 제9부: 평면 압축 강도 측정
纸和纸板.芯的试验.第9部分:平压强度的测定

ISO 11093-9-2019

Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
纸和纸板.芯的试验.第9部分:平压强度的测定

UNE 57163-6-1994

PAPER AND BOARD. TESTING OF CORES. PART 5: DETERMINATION OF CHARACTERISTICS OF CONCENTRIC ROTATION.
纸和纸板岩心测试第5部分:同心旋转特性的测定

ISO 11093-5-2016

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
纸和纸板 - 纸芯的测定 - 第5部分:同心旋转特性的测定

KS M ISO 11093-6

종이 및 판지 - 지관의 시험 - 제6부 : 3점법에 의한 휨 강도의 측정
纸和纸板 - 核心测试 - 第6部分:三点法确定弯曲强度

KS M ISO 11093-6

종이 및 판지 — 지관 시험 —제6부: 3점법에 의한 휨강도의 측정
纸和纸板.纸芯试验.第6部分:用三点法测定弯曲强度

ISO 11093-6-2005

Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
纸和纸板——CoreStart 6的测试:用三点法测定弯曲强度

ISO 11093-3-1994

Paper and board — Testing of cores — Part 3: Determination of moisture content using the oven drying method
纸和纸板——coresPart 3的测试:使用烘箱干燥法测定水分含量

KS M ISO 11093-3

종이 및 판지 — 지관 시험 — 제3부:오븐 전건법을 이용한 함수율 측정
纸和纸板 - 核心测试 - 第3部分:使用烘箱干燥法测定水分含量

UNE 57163-3-2002

Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven drying method.
纸和纸板.纸芯试验.第3部分:用烘箱干燥法测定水分含量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统