首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 KS M ISO 11093-7-2020
到馆提醒
收藏跟踪
购买正版
종이 및 판지 — 지관 시험 —제7부: 3점법에 의한 굴곡 탄성률 측정 纸和板 - 芯的测试 - 第7部分:通过三点法测定弯曲模量
发布日期: 2020-08-21
该规格规定了满足以下范围的圆柱形纸和纸板支管计数测量方法:
이 규격은 다음의 범위를 만족시키는 원통형 종이와 판지 지관의 계수 측정 방법에 대하여 규정한다.
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
ISO 11093-7-2011
Paper and board — Testing of cores — Part 7: Determination of flexural modulus by the three-point method
纸和纸板——Corestart 7的测试:用三点法测定弯曲模量
2011-09-13
现行
BS ISO 11093-7-2011
Paper and board. Testing of cores-Determination of flexural modulus by the three-point method
纸和纸板 岩心测试
2011-10-31
现行
BS ISO 11093-8-2017
Paper and board. Testing of cores-Determination of natural frequency and flexural modulus by experimental modal analysis
纸和纸板 岩心测试
2017-06-28
现行
KS M ISO 11093-8
종이 및 판지 — 지관 시험 —제8부: 실험적 모드 해석에 의한 고유 진동수 및 굴곡 탄성률 측정
纸和板 - 芯的测试 - 第8部分:通过实验模态分析测定固有频率和弯曲模量
2020-08-21
现行
ISO 11093-8-2017
Paper and board — Testing of cores — Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
绘制并绘制每瓶命名卷8:样本模块和狗狗频率时态 并进行实验分析
2017-06-15
现行
UNE 57163-7-2004
Paper and board - Testing of cores - Part 7: Determination of bending strength by the three-point method.
纸和纸板.纸芯试验.第7部分:用三点法测定弯曲强度
2004-01-16
现行
GB/T 22906.7-2008
纸芯的测定 第7部分:弹性模量的测定(三点法)
Testing of cores - Part 7: Determination of flexural modulus by the three-point method
2008-12-30
现行
DIN 54530-10
Paper and board - Testing of cores - Part 10: Determination of surface roughness
纸和纸板.纸芯试验.第10部分:表面粗糙度的测定
2000-02-01
现行
BS 11/30246408 DC
BS ISO 11093-8. Paper and board. Testing of cores. Part 8. Determination of natural frequency and flexural modulus by experimental modal analysis
BS ISO 11093-8 纸和纸板 岩心测试 第八部分 通过实验模态分析确定固有频率和弯曲模量
2011-12-01
现行
ISO 11093-9-2019
Paper and board — Testing of cores — Part 9: Determination of flat crush resistance
纸和纸板.芯的试验.第9部分:平压强度的测定
2019-03-05
现行
KS M ISO 11093-5
종이 및 판지 — 지관 시험 —제5부: 동심 회전 특성 측정
纸和板 - 核心测试 - 第5部分:同心旋转特性的确定
2020-08-21
现行
KS M ISO 11093-9
종이 및 판지 — 지관 시험 — 제9부: 평면 압축 강도 측정
纸和纸板.芯的试验.第9部分:平压强度的测定
2018-12-31
现行
UNE 57163-6-1994
PAPER AND BOARD. TESTING OF CORES. PART 5: DETERMINATION OF CHARACTERISTICS OF CONCENTRIC ROTATION.
纸和纸板 岩心测试 第5部分:同心旋转特性的测定
1994-03-21
现行
ISO 11093-5-2016
Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation
纸和纸板 - 纸芯的测定 - 第5部分:同心旋转特性的测定
2016-01-19
现行
ISO 11093-6-2005
Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
纸和纸板——CoreStart 6的测试:用三点法测定弯曲强度
2005-04-29
现行
KS M ISO 11093-6
종이 및 판지 - 지관의 시험 - 제6부 : 3점법에 의한 휨 강도의 측정
纸和纸板 - 核心测试 - 第6部分:三点法确定弯曲强度
2016-11-18
现行
KS M ISO 11093-6
종이 및 판지 — 지관 시험 —제6부: 3점법에 의한 휨강도의 측정
纸和纸板.纸芯试验.第6部分:用三点法测定弯曲强度
2022-05-26
现行
KS M ISO 11093-3
종이 및 판지 — 지관 시험 — 제3부:오븐 전건법을 이용한 함수율 측정
纸和纸板 - 核心测试 - 第3部分:使用烘箱干燥法测定水分含量
2018-12-31
现行
ISO 11093-3-1994
Paper and board — Testing of cores — Part 3: Determination of moisture content using the oven drying method
纸和纸板——coresPart 3的测试:使用烘箱干燥法测定水分含量
1994-12-08
现行
UNE 57163-3-2002
Paper and board - Testing of cores - Part 3: Determination of moisture content using the oven drying method.
纸和纸板.纸芯试验.第3部分:用烘箱干燥法测定水分含量
2002-09-30