BS EN 10205:2016规定了以线圈形式生产的黑板产品的要求 直接使用，主要用于生产马口铁、电解铬/氧化铬板 （ECCS）和电解镀锌板。黑板的标称厚度为0.10mm以上的0005mm的倍数 到0,60毫米。本欧洲标准适用于标称最小宽度为600 mm的线圈。 除本标准外，EN 10021的一般技术交付条件也适用。注:特定用途的标准宽度线圈，例如。 g、 标签库存，可切成窄条，以线圈形式供应。交叉引用:EN 10020EN 10021EN 10027-1EN 10027-2EN 10052EN 10079EN 10204:2004EN ISO 6892-1:2009ISO 6892-1:2009CEN/TR 10261EN ISO 4288ISO 4288:1996EN ISO 6508-1ISO 6508-1:2016EN ISO 14284ISO 14284:1996ISO 11951购买本文件时提供的所有当前修订版均包括在内。

BS EN 10205:2016 specifies requirements for blackplate product in the form of coils intended for direct use and mostly for the production of tinplate, electrolytically chromium / chromium oxide plate (ECCS) and electrolytically zinc coated plate.Blackplate is specified in nominal thicknesses that are multiples of 0,005 mm from typical 0,10 mm up to 0,60mm.This European Standard applies to coils in nominal minimum widths of 600 mm. In addition to this standard the general technical delivery conditions of EN 10021 apply.NOTE Standard width coils for specific uses, e.g. tab stock, can be slit into narrow strip for supply in coil form.Cross References:EN 10020EN 10021EN 10027-1EN 10027-2EN 10052EN 10079EN 10204:2004EN ISO 6892-1:2009ISO 6892-1:2009CEN/TR 10261EN ISO 4288ISO 4288:1996EN ISO 6508-1ISO 6508-1:2016EN ISO 14284ISO 14284:1996ISO 11951All current amendments available at time of purchase are included with the purchase of this document.