现行

UNE 31001-1991

TEST OF EXPLOSIVES IN LEAD BLOCK. TRAUZL TEST.
铅块中炸药的测试 特劳兹试验

1991-03-11

现行

GB/T 12436-1990

炸药作功能力试验 铅铸法
Explosive--Determination of power--Lead block method

1990-07-21

现行

GB/T 12440-1990

炸药猛度试验　铅柱压缩法
Explosive—Determination of brisance—Lead cylinder compression test

1990-07-21

现行

DIN 53366

Testing of plastic films and sheetings - Determination of blocking strength
塑料薄膜和薄板的试验.封闭强度的测定

2007-10-01

现行

UNE 67038-1986

HOLLOW CLAY BLOCKS FOR FLOOR. COMPRESSIVE STRENGTH TEST
地板用空心粘土块 抗压强度试验

1986-11-15

现行

BS EN 13763-7-2003

Explosives for civil uses. Detonators and relays-Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
民用爆炸物 雷管和继电器

2003-11-19

现行

GOST 27647-1988

Резисторы переменные. Метод проверки механической прочности вала управления
可验证电阻丝杠机械强度试验方法

现行

IEEE 84-1963

IEEE Test Procedure for Determining Tensile Strength and Hardness of Lead Sheaths
IEEE铅护套抗拉强度和硬度测定的试验程序

1963-11-20

现行

UNE-EN 13763-7-2004

Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
民用炸药雷管和继电器第7部分:引线、激波管、连接件、卷边和密封件机械强度的测定

2004-06-25

现行

JIS A 1611-1996

Testing methods for bond strength of adhesives and of installed glue-joints in anchoring wooden block
锚固木块中胶粘剂和已安装胶接接头粘结强度的试验方法

1996-01-01

现行

ASTM D4501-01(2023)

Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
用块剪切法测定刚性基材之间粘结强度的标准试验方法

2023-01-01

现行

ASTM D6916-18(2024)

Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
测定分段混凝土单元（模块混凝土块）之间剪切强度的标准试验方法

2024-11-01

现行

KS C IEC TS 61430(2023 Confirm)

이차 단전지 및 전지 — 폭발 위험성을 줄이도록 설계된 장치의 성능 검토 시험방법 — 시동용 납축전지
二次电池和蓄电池组降低爆炸危险装置性能检验的试验方法铅酸起动蓄电池组

2018-12-27

现行

KS C IEC TS 61430

이차 단전지 및 전지 — 폭발 위험성을 줄이도록 설계된 장치의 성능 검토 시험방법 — 시동용 납축전지
蓄电池和电池组检查设计用于减少爆炸危险的设备性能的试验方法铅酸起动器电池

2018-12-27

现行

IEC TS 61430-1997

Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
二次电池和蓄电池组.减少爆炸危险装置性能检验的试验方法.铅酸起动蓄电池

1997-10-30

现行

BS PD IEC/TR 61430-1997

Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
二次电池和电池 用于检查设计用于减少爆炸危险的装置性能的试验方法 铅酸起动电池

2006-08-31

现行

GOST R IEC 61430-2004

Аккумуляторы и аккумуляторные батареи. Методы испытаний функционирования устройств, предназначенных для уменьшения взрывоопасности. Свинцово-кислотные стартерные батареи
二次电池和电池 用于检查设计用于减少爆炸危险的设备的性能的测试方法 铅酸起动电池

现行

ASTM D6638-18(2024)

Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
测定土工合成钢筋和节段混凝土单元（模块混凝土块）之间连接强度的标准试验方法

2024-11-01

现行

JIS Z 3198-7-2003

Test methods for lead-free solders -- Part 7: Methods for shear strength of solder joints on chip components
无铅焊料试验方法第7部分:芯片组件焊点剪切强度试验方法

2003-01-01

现行

DIN EN 13763-7-DRAFT

Draft Document - Explosives for civil uses - Detonators and detonating cord relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures; German and English version prEN 13763-7:2021
文件草案.民用炸药.雷管和导爆索继电器.第7部分:引线、激波管、连接件、卷曲件和密封件机械强度的测定；德语和英语版本prEN 13763-7:2021

2021-06-01