首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D7544-23
到馆提醒
收藏跟踪
购买正版
Standard Specification for Pyrolysis Liquid Biofuel 热解液体生物燃料标准规范
发布日期: 2023-05-01
1.1 本规范涵盖了在各种气候和操作条件下用于各种类型燃料燃烧设备的生物质生产的热解液体生物燃料等级。这些等级描述如下: 1.1.1 G级用于工业燃烧器,该燃烧器用于处理热解液体生物燃料,符合 表1 .在中被列为G级的热解液体生物燃料 表1 不适用于家用加热器、小型商用锅炉、发动机或船舶应用。 1.1.2 D级用于需要较低固体和灰分含量的商业/工业燃烧器,该燃烧器用于处理满足中D级要求的热解液体生物燃料 表1 .中D级下列出的热解液体生物燃料 表1 不适用于未经改装以处理这些类型燃料的家用加热器、发动机或船舶应用。 注1: 有关本规范中确定的物理、化学和性能特性重要性的信息,请参阅 附录X1 . 1.2 本规范用于购买热解液体生物燃料的合同,并用于指导此类燃料的消费者。 1.3 本规范中的任何内容都不应妨碍遵守国家或地方法规,这些法规可能更具限制性。 注2: 静电的产生和耗散可能会在热解液体生物燃料的处理中产生问题。有关该主题的更多信息,请参阅指南 D4865 . 1.4 以国际单位制表示的数值应视为标准。本标准不包括其他计量单位。 1.4.1 例外情况- BTU单位仅供参考 3.2.3 1. 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers grades of pyrolysis liquid biofuel produced from biomass intended for use in various types of fuel-burning equipment under various climatic and operating conditions. These grades are described as follows: 1.1.1 Grade G is intended for use in industrial burners equipped to handle the pyrolysis liquid biofuels meeting the requirements listed for Grade G in Table 1 . The pyrolysis liquid biofuel listed under Grade G in Table 1 is not intended for use in residential heaters, small commercial boilers, engines, or marine applications. 1.1.2 Grade D is intended for use in commercial/industrial burners requiring lower solids and ash content and which are equipped to handle the pyrolysis liquid biofuels meeting the requirements listed for Grade D in Table 1 . The pyrolysis liquid biofuel listed under Grade D in Table 1 is not intended for use in residential heaters, engines, or marine applications not modified to handle these types of fuels. Note 1: For information on the significance of the physical, chemical, and performance properties identified in this specification, see Appendix X1 . 1.2 This specification is for use in contracts for the purchase of pyrolysis liquid biofuel and for guidance of consumers of this type of fuel. 1.3 Nothing in this specification should preclude observance of national or local regulations, which may be more restrictive. Note 2: The generation and dissipation of static electricity may create problems in the handling of pyrolysis liquid biofuel. For more information on the subject, see Guide D4865 . 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4.1 Exception— BTU units are included for information only in 3.2.3 .1. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D02.E0
相似标准/计划/法规
现行
ASTM D7579-09(2019)
Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
甲醇固体过滤法测定热解液体中热解固体含量的标准试验方法
2019-05-01
现行
NB/T 13003-2015
生物液体燃料项目执行管理标准
Standards of project implementation management for liquid biofuels
2015-10-27
现行
NB/T 10071-2018
生物液体燃料副产品沼液沼渣就地消纳技术规范
Technical specifications for elimination on the spot of biogas slurry and biogas residue from liquid biofuels by-products
2018-10-29
现行
ASTM E1120-21
Standard Specification for Liquid Chlorine
液氯标准规范
2021-07-01
现行
ASTM D2851-15(2023)
Standard Specification for Liquid Optical Adhesive
液体光学粘合剂的标准规范
2023-05-01
现行
ASTM F3159-15(2022)
Standard Safety Specification for Liquid Laundry Packets
液体洗衣袋的标准安全规范
2022-03-01
现行
ASTM E2251-14(2021)
Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
具有低危险精密液体的ASTM玻璃液体温度计的标准规范
2021-12-01
现行
ASTM E1-14(2020)
Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM玻璃液体温度计标准规范
2020-05-01
现行
ASTM F2044-09(2024)
Standard Specification for Liquid Level Indicating Equipment, Electrical
电气液位指示设备的标准规范
2024-05-01
现行
ASTM D4652-20
Standard Specification for Silicone Liquid Used for Electrical Insulation
电绝缘用硅树脂液体的标准规范
2020-11-01
现行
CTI STD-146(08)
CTI Code Tower Standard Specifications for Standard for Liquid Flow Measurement
CTI代码塔液体流量测量标准规范
2008-09-01
现行
ASTM F3267-22
Standard Specification for Protective Clothing for Use Against Liquid Chemotherapy and Other Liquid Hazardous Drugs
用于液体化疗和其他液体危险药物的防护服标准规范
2022-12-01
现行
ASTM D5355-95(2021)
Standard Test Method for Specific Gravity of Oils and Liquid Fats
油和液体脂肪比重的标准试验方法
2021-12-01
现行
ASTM C309-19
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
用于固化混凝土的液膜成型化合物的标准规范
2019-06-15
现行
ASTM D6083/D6083M-24
Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing
屋面用液体丙烯酸涂料的标准规范
2024-01-01
现行
ASTM D3487-24
Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
电气设备用矿物绝缘液体的标准规范
2024-06-01
现行
ASTM E1061-01(2022)
Standard Specification for Direct-Reading Liquid Crystal Forehead Thermometers
直读式液晶前额温度计的标准规范
2022-02-01
现行
KS F 2540
콘크리트 양생용 액상 피막 형성제
养护混凝土用液态成膜剂
2020-12-14
现行
AASHTO M 148-05
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
养护混凝土用液膜形成化合物的标准规范
2005-08-01
现行
UL 142A
Standard for Special Purpose Aboveground Tanks for Specific Flammable or Combustible Liquids
特殊易燃或可燃液体专用地上储罐标准
2018-05-25