Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天窄公差盘头螺栓 带螺纹TORQ-SET（ACR）凹槽 MJ螺纹 短螺纹 钢制 标称抗拉强度900 MPa 适用温度高达235℃

1984-07-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓 短螺纹 钢制 标称抗拉强度900 MPa 适用于235℃以下的温度

1984-07-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C
航空航天钢制带肋TORQ-SET（ACR）凹槽和短长度MJ螺纹的盘头螺栓；温度高达235°C时的标称抗拉强度为110 MPa

1987-08-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金短螺纹带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于315℃以下的温度

1984-07-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天耐腐蚀钢制带肋TORQ-SET（ACR）凹槽和短长度MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于425°C以下的温度

1987-12-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓；全螺纹耐腐蚀钢；温度高达425°C时的标称抗拉强度为1100 MPa

1987-08-01

BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/3A)
95 KSI FSU长螺纹合金钢紧公差带肋托尔克凹槽盘头螺栓（无S/S文件）（代替MIL-B-87114/3A）

1981-11-23

BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/3A)
紧公差合金钢、长螺纹、95 KSI FSU（无S/S文件）（代替MIL-B-87114/3A）

1991-09-23

BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/3A)
紧公差合金钢、长螺纹、95 KSI FSU（无S/S文件）（代替MIL-B-87114/3A）

1996-07-12

Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天短螺纹长度钢制带肋TORQ-SET（ACR）凹槽和MJ螺纹的紧公差沉头螺钉 标称抗拉强度900 MPa 适用于235°C以下的温度

1987-03-01

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓；全螺纹 镍合金；标称抗拉强度1250 MPa 适用于315°C/425°C以下的温度

1987-08-01

Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金全螺纹带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺钉；温度高达315°C时的标称抗拉强度为1100 MPa

1989-09-01

Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
航空航天小公差沉头螺钉 带螺纹TORQ-SET（ACR）凹槽和MJ螺纹 短螺纹长度 镍合金 标称抗拉强度1250 MPa 适用于315°C/425°C以下的温度

1987-03-01

Aerospace; pan head bolts with ripped TORQ-SET (ACR) recess and MJ-thread, short thread, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
航空航天温度高达425°C的耐腐蚀钢制短螺纹MJ螺纹开口TORQ-SET（ACR）凹槽盘头螺栓 标称抗拉强度700 MPa

1984-07-01

BOLTS, 100 DEG. HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/1A)
螺栓 100度头 带肋托尔克凹槽 紧公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/1A）

1981-11-23

BOLTS, 100 DEG. HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/1A)
螺栓 100度头 肋条至调Q凹槽 精密公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/1A）

1996-07-12

BOLTS, 100 DEG. REDUCED DOME HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/2A)
螺栓 100度缩径圆顶头 带肋TORQ-SET凹槽 紧公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/2A）

1981-11-23

BOLTS, 100 DEG. REDUCED DOME HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/2A)
螺栓 100度缩径圆顶 肋条至rq-SET凹槽 精密公差 合金钢 长螺纹 95 KSI FSU（无文件）（代替MIL-B-87114/2A）

1996-07-12