现行

MIL MIL-B-87114/3B Notice 1-Validation

BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/3A)
紧公差合金钢、长螺纹、95 KSI FSU（无S/S文件）（代替MIL-B-87114/3A）

1991-09-23

现行

MIL MIL-B-87114/3B Notice 2-Cancellation

BOLT, PAN HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/3A)
紧公差合金钢、长螺纹、95 KSI FSU（无S/S文件）（代替MIL-B-87114/3A）

1996-07-12

现行

DIN 65520

Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess an MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天窄公差盘头螺栓 带螺纹TORQ-SET（ACR）凹槽 MJ螺纹 短螺纹 钢制 标称抗拉强度900 MPa 适用温度高达235℃

1984-07-01

现行

DIN 65319

Aerospace; pan head bolts, close tolerance, with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天盘头螺栓 紧公差 带螺纹TORQ-SET（ACR）凹槽和短长度MJ螺纹 耐腐蚀钢；温度高达425°C时的标称抗拉强度为1100 MPa

1987-08-01

现行

NAS 7700 THRU 7706 Rev.5

Bolt, Pan Head, Close Tolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking and Nonlocking
螺栓 盘头 紧公差 短螺纹 十字槽 合金钢 自锁和非自锁

2012-12-21

现行

MIL MIL-B-87114/1B

BOLTS, 100 DEG. HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/1A)
螺栓 100度头 带肋托尔克凹槽 紧公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/1A）

1981-11-23

现行

MIL MIL-B-87114/1B Notice 2-Cancellation

BOLTS, 100 DEG. HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/1A)
螺栓 100度头 肋条至调Q凹槽 精密公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/1A）

1996-07-12

现行

NAS 8602 THRU 8616 Rev.1

Bolt, Shear, 100 degree Reduced Head, Ribbed Cruciform Recess, Close Tolerance, Alloy Steel, Short Thread
短螺纹合金钢密公差带肋十字槽100度异径头剪切螺栓

2012-11-30

现行

NAS 5000 THRU 5006

Bolt, Pan Head, Close Tolerance, Short Thread, Tri-Slot Recess, Alloy Steel, Self-Locking and Nonlocking
螺栓 盘头 紧公差 短螺纹 三槽凹槽 合金钢 自锁和非自锁

1996-03-29

现行

MIL MIL-B-87114/2B

BOLTS, 100 DEG. REDUCED DOME HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/2A)
螺栓 100度缩径圆顶头 带肋TORQ-SET凹槽 紧公差 合金钢 长螺纹 95 KSI FSU（无S/S文件）（代替MIL-B-87114/2A）

1981-11-23

现行

MIL MIL-B-87114/2B Notice 2-Cancellation

BOLTS, 100 DEG. REDUCED DOME HEAD, RIBBED-TORQ-SET RECESS, CLOSE TOLERANCE, ALLOY STEEL, LONG THREAD, 95 KSI FSU (NO S/S DOCUMENT) (SUPERSEDING MIL-B-87114/2A)
螺栓 100度缩径圆顶 肋条至rq-SET凹槽 精密公差 合金钢 长螺纹 95 KSI FSU（无文件）（代替MIL-B-87114/2A）

1996-07-12

现行

DIN 65519

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓 短螺纹 钢制 标称抗拉强度900 MPa 适用于235℃以下的温度

1984-07-01

现行

DIN 65318

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ-thread, steel; nominal tensile strength 110 MPa, for temperatures up to 235 °C
航空航天钢制带肋TORQ-SET（ACR）凹槽和短长度MJ螺纹的盘头螺栓；温度高达235°C时的标称抗拉强度为110 MPa

1987-08-01

现行

DIN 65518

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ-thread, short thread, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
航空航天钛合金短螺纹带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于315℃以下的温度

1984-07-01

现行

DIN 65554

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and short-length MJ thread, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天耐腐蚀钢制带肋TORQ-SET（ACR）凹槽和短长度MJ螺纹的盘头螺栓 标称抗拉强度1100 MPa 适用于425°C以下的温度

1987-12-01

现行

DIN 65313

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, corrosion-resisting steel; nominal tensile strength 1100 MPa, for temperatures up to 425 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓；全螺纹耐腐蚀钢；温度高达425°C时的标称抗拉强度为1100 MPa

1987-08-01

现行

DIN 65269

Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
航空航天短螺纹长度钢制带肋TORQ-SET（ACR）凹槽和MJ螺纹的紧公差沉头螺钉 标称抗拉强度900 MPa 适用于235°C以下的温度

1987-03-01

现行

NAS 7400 THRU 7416 Rev.4

Bolt, Shear, 100 degree Flush Head, Ribbed Cruciform Recess, Close Tolerance. Alloy Steel, Short Thread, Self-Locking and Nonlocking, 95 KSI Fsu
螺栓 剪切 100度平头 带肋十字槽 紧公差 合金钢 短螺纹 自锁和非自锁 95 KSI Fsu

2012-11-30

现行

NAS 7103 THRU 7116 Rev.7

Bolt, Shear, 100 degree Flush Head, Ribbed Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking, 95 KSI Fsu
螺栓、剪刀、100度平头、带肋十字槽、紧公差、合金钢、长螺纹、自锁和非锁紧、95 KSI Fsu

2012-11-30

现行

DIN 65541

Aerospace; pan head bolts with ribbed TORQ-SET (ACR) recess and MJ thread; fully threaded, nickel alloy; nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
航空航天带肋TORQ-SET（ACR）凹槽和MJ螺纹的盘头螺栓；全螺纹 镍合金；标称抗拉强度1250 MPa 适用于315°C/425°C以下的温度

1987-08-01