本欧洲标准规定了剥离蛭石产品的要求，这些产品用于建筑设备和工业设备的原位保温，工作温度范围约为40°C至1050°C。 本欧洲标准规定了四种类型的剥离蛭石产品蛭石聚集体（EVA），涂覆蛭石（EVC），疏水蛭石（EVH）和预混蛭石（EVM））的要求，其含有小于1质量％的有机材料，由EN 15600-1:2010附录C。 本欧洲标准是已安装产品的规范。 本欧洲标准还规定了用于产品安装人员声明的检查和测试程序。 本欧洲标准没有规定产品在特定应用中展现适合目的的所有属性所需的水平。在法规或非冲突标准中可以找到所需的级别。 本欧洲标准不包括具有剥离蛭石的成型形状和板材的工厂绝缘产品。 本欧洲标准涵盖的产品不能主要用于机载隔音或声音

This European Standard specifies the requirement for exfoliated vermiculite products, which are used for in-situ thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately – 40 ºC to + 1050 ºC. This European Standard specifies the requirements for the four types of exfoliated vermiculite products Vermiculite Aggregate (EVA), Coated Vermiculite (EVC), Hydrophobic Vermiculite (EVH) and Premixed Vermiculite (EVM), containing less than 1 % by mass organic material as determined by Annex C in EN 15600-1:2010. This European Standard is a specification for the installed products. This European Standard also specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with exfoliated vermiculite. The products covered by this European Standard are not intended to be used primarily for airborne sound insulation or sound absorption applications although they may improve the performance of the installation in these respects when installed for their primary insulation intended use.