BS ISO 965-3:2021-ISO通用公制螺纹公差-国家数字标准馆

现行 BS ISO 965-3:2021

到馆阅读

收藏跟踪

购买正版

ISO general purpose metric screw threads. Tolerances-Limit deviations for screw threads ISO通用公制螺纹公差

发布日期： 2021-07-30

本文件规定了符合ISO 261的ISO通用公制螺纹（M）的节距和顶径极限偏差，其基本轮廓符合ISO 68-1。
规定的极限偏差源自ISO 965-1中规定的基本偏差和公差。
本文件适用于ISO通用公制螺纹，推荐使用
宽容班。交叉引用:ISO 68-1:1998ISO 261:1998ISO 965-1:1998ISO 5408:1983

This document specifies limit deviations for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to ISO 261 having basic profile in accordance with ISO 68-1.
The limit deviations specified are derived from the fundamental deviations and tolerances specified in ISO 965-1.
This document is applicable to ISO general purpose metric screw threads with the recommended
tolerance classes.Cross References:ISO 68-1:1998ISO 261:1998ISO 965-1:1998ISO 5408:1983

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
ISO通用米制螺纹.公差.第3部分:螺纹的极限偏差

ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
ISO通用公制螺纹公差结构螺纹的偏差

普通螺纹极限偏差
General purpose metric screw threads—Limit deviations

JIS B 0209-3-2001

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
ISO通用米制螺纹公差第3部分:结构螺纹的偏差

ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads(ISO 965-3:1998)
ISO通用米制螺纹公差第3部分:结构螺纹的偏差

ISO general purpose metric screw threads - Part 52: Multi-start thread tolerances and deviation of profile
ISO通用米制螺纹第52部分:多头螺纹公差和轮廓偏差

BS ISO 965-2-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO通用公制螺纹公差

ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
ISO通用公制螺纹公差通用外螺纹和内螺纹的尺寸限制中等质量

DIN ISO 965-3-DRAFT

Draft Document - ISO general purpose metric screw threads - Tolerances - Part 3: Limit deviations for screw threads (ISO/DIS 965-3:2020); Text in German and English
文件草稿ISO通用米制螺纹公差第3部分:螺纹极限偏差；德语和英语文本

普通螺纹公差
General purpose metric screw threads—Tolerances

JIS B 0209-2-2001

ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO通用公制螺纹公差第2部分:通用外螺纹和内螺纹尺寸限值中等质量

ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
ISO公制梯形螺纹；通用梯形螺纹的公差和公差

BS ISO 965-1-2013+A1-2021

ISO general purpose metric screw threads. Tolerances-Principles and basic data
ISO通用公制螺纹公差

ISO GENERAL PURPOSE METRIC SCREW THREADS. TOLERANCES. PRINCIPLES AND BASIC DATA.
ISO通用公制螺纹公差原则和基本数据

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality (ISO 965-2:1998)
ISO通用公制螺纹-公差-第2部分:通用外螺纹和内螺纹的尺寸限制；中等质量（ISO 965-2-1998）

GB/T 15756-2008

普通螺纹极限尺寸
General purpose metric screw threads - Limits of sizes

Screw gauge limits and tolerances. Specification for gauges for screw threads of ISO metric form
螺钉规限值和公差 ISO米制螺纹量规规范

ISO general purpose metric screw threads - Part 50: Combination of tolerance classes for formed internal screw threads
ISO通用米制螺纹.第50部分:成型内螺纹公差等级的组合

BS ISO 965-4-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
ISO通用公制螺纹公差

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹公差

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统