本文件规定了紫外线激光打印护套、镀锡铜导体、， 电气设备用交联乙烯-四氟乙烯共聚物（XLETFE）系列电缆 在-65°C和135°C之间的温度下，在海平面600 V rms下运行的飞机机载电气系统。该绝缘系统已在航空航天应用中使用，使用115 V（相对中性）400 Hz ac和28 Vdc。验证电缆是否适用于其他电气系统 是用户的责任。 这些护套电缆适用于机身使用，当护套 目前剥去护套后，芯线可能需要额外保护。万一发生冲突 在本标准和其他参考文件之间，应采用本标准的要求 优先交叉引用:EN 4611（所有部分）EN 2235EN 2084TR 6058EN 9133EN 3838FED-STD-595BEN 3475-100（所有部分）EN 4434购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies the characteristics of UV laser printable jacket, tin plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer (XLETFE) family for use in the on board electrical systems of aircraft operating at temperatures between - 65 °C and 135 °C at 600 V rms at sea level. This insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz ac and 28 Vdc. Verification of the suitability of cables for use in other electrical systems is the responsibility of the user. These jacketed cables are suitable for airframe use without additional protection when the jacket is present. When the jacket is stripped back the cores may need additional protection. In case of conflict between this standard and other referenced documents the requirements of this standard shall take precedence.Cross References:EN 4611(all parts)EN 2235EN 2084TR 6058EN 9133EN 3838FED-STD-595BEN 3475-100 (all parts)EN 4434All current amendments available at time of purchase are included with the purchase of this document.