本修订版允许将BS EN 10210-1的发布作为建筑产品指令（CPD）89/106/EC——结构金属产品下的协调标准。在CEN顾问的指导下，已开展了有关标准的工作。修订版对范围进行了修改，增加了S420方形和矩形截面的额外钢种、规范性参考，并在两种平行产品（BS EN 10210-1和BS EN 10219）之间调整了生产工艺和技术要求- 1).交叉引用:EN 287-1EN 10002-1EN 10020:2000EN 10021:1993EN 10027-1EN 10027-2EN 10045-1EN 10052:1993EN 10168EN 10204EN 10210-2:2006EN 10246-3EN 10246-5EN 10246-8EN 10246-9EN 10246-10EN 10256CR 10261ECIS信息通告11EN 10266:2003EN ISO 377:1997EN ISO 643ISO 643:2003EN ISO 2566-1ISO 2566-1:1984EN ISO 9001:2000EN ISO 14284ISO 1426084:2006ENISO 15609-1ISO 15609-1:2004EN ISO 15614-1ISO 15614-1:2004EN 473EN 1011-1EN 1011-2EN 1993-1-1EN 10025-2EN 10025-31998/214/EC89/106/EEC/68/EEC

This revision permits the publication of BS EN 10210-1 to be adopted as a Harmonised Standard under the Constuction Products Directive (CPD) 89/106/EC - Structural metallic products. Work on the Standard has been undertaken with the guidance of the CEN Consultant. The revision has introduced changes to the scope by adding an additional steel grade for S420 square and rectangular sections, the normative reference and aligns the production processes and the technical requirements between two parallel products (BS EN 10210-1 and BS EN 10219-1).Cross References:EN 287-1EN 10002-1EN 10020:2000EN 10021:1993EN 10027-1EN 10027-2EN 10045-1EN 10052:1993EN 10168EN 10204EN 10210-2:2006EN 10246-3EN 10246-5EN 10246-8EN 10246-9EN 10246-10EN 10256CR 10261ECISS Information Circular 11EN 10266:2003EN ISO 377ISO 377:1997EN ISO 643ISO 643:2003EN ISO 2566-1ISO 2566-1:1984EN ISO 9001:2000ISO 9001:2000EN ISO 14284ISO 14284:1996EN ISO 15607ISO 15607:2003EN ISO 15609-1ISO 15609-1:2004EN ISO 15614-1ISO 15614-1:2004EN 473EN 1011-1EN 1011-2EN 1993-1-1EN 10025-2EN 10025-31998/214/EC89/106/EEC93/68/EEC