1.1 本试验方法提供了一种收集挥发性有机化合物（VOC）的方法，这些挥发性有机化合物是在设计用于模拟规定生产过程的实验室环境中，在制造工程木材产品过程中排放的。该方法用于测定在设计用于模拟生产的条件下（如热压、“热堆叠”和“冷却”）可能排放的甲醇、甲醛、苯酚和其他挥发性有机化合物的量- 按下后发生的“向下”。 1.2 该测试方法最初用于测量符合自愿产品标准PS 1-09的外部胶合板和符合规范的结构复合木材产品（如单板层积材）中的某些挥发性有机化合物 D5456 . 这两种产品类型通常使用符合规范的酚醛树脂基粘合剂制造 D2559 . 1.3 该试验方法适用于用粘合剂粘合的许多类型的木制品。 1.4 本试验方法专门用于在模拟木制品生产过程中收集挥发性有机化合物，并不是为了确定所有室内材料或来源的一般有机排放。 1.5 以国际单位制表示的数值应视为标准值。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 第节给出了一些具体的危害说明 7. 关于危险。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 遵守国家和地方空气排放法规需要确定粘合剂的挥发性有机化合物（VOC）排放量- 粘合结构木制品。 5.2 该方法已用于估计生产过程中排放的某些挥发性有机化合物的类型和数量。 5.3 该方法最初用于测量实验室环境中排放的甲醇、甲醛和苯酚，该实验室环境旨在模拟外部胶合板和单板层积材（LVL）工艺的热压、热压和冷却期的后压条件。这种当前方法概括了粘合剂的概念- 粘合木制品。

1.1 This test method provides a method for the collection of volatile organic compounds (VOC) that are emitted during the manufacture of engineered wood products using a laboratory environment designed to simulate a defined production process. The method is used for the determination of the amounts of methanol, formaldehyde, phenol and other VOC that may be emitted during conditions designed to simulate production such as hot pressing, the conditions of ‘hot stacking’ and ‘cool-down’ that occurs post-press. 1.2 The test method was originally developed to measure certain VOC from exterior plywood meeting Voluntary Product Standard PS 1–09 and structural composite lumber products such as laminated veneer lumber (LVL) meeting Specification D5456 . Both of these product types are typically manufactured using phenol-formaldehyde resin based adhesives that meet Specification D2559 . 1.3 The test method is suitable for many types of wood products bonded with adhesives. 1.4 This test method is specific for collecting VOC during simulated production of wood products and is not designed to determine general organic emissions from all indoor materials or sources. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7 on Hazards. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 Compliance with national and local air emission regulations create the need to determine volatile organic compound (VOC) emissions from adhesive-bonded structural wood products. 5.2 This method has been used to estimate the types and amounts of certain VOC that are emitted during production operations. 5.3 The method was originally developed to measure the methanol, formaldehyde, and phenol emitted in a laboratory setting that is designed to simulate the hot pressing, and post pressing conditions of hot stacking and cool down period for exterior plywood and laminated veneer lumber (LVL) processes. This current method generalizes the concept for adhesive-bonded wood products.