BS 5467:2016规定了施工和安装要求 额定电压热固性绝缘铠装电缆的性能 600/1000 V和1900/3 300 V。本英国标准适用于英国固定装置中使用的电缆 工业区、建筑物或类似应用。本英国标准规定了以下类型电缆的要求:600/1000 V电缆，钢丝铠装和外护套，单芯， 二芯、三芯、四芯和五芯绞合铜导线；600/1000 V多芯辅助电缆，钢丝铠装和外护套， 绞合铜导线；和1根900/3 300 V单芯铠装外护套电缆 或三芯绞合铜导线。本英国标准适用于设计最大使用寿命的电缆 导体持续温度为90°C，且最大短路 导线温度为250°C（最长5秒）。注1:在某些情况下，可能会对电缆的温度施加限制 他们可能会被触碰的地方，或者他们可能会触碰其他材料的地方。注2:附录A给出了电缆的使用和安装指南，附录B给出了 铠装线试验，附录C给出了兼容性试验，附录D给出了磨损试验 电阻测试，附录E给出了外护套的绝缘电阻常数测试， 附录F给出了导体和铠装的电阻，附录G给出了总电阻 附录H中的装甲横截面积给出了外护套收缩试验 电缆，附录I给出了型式试验指南，附录J给出了标准 王国参考代码。交叉引用:BS 7655-1.2BS 7655-1.3BS 7655-4.2BS EN 10244-2:2009BS EN 50395BS EN 50396BS EN 60228BS EN 60229BS EN 60332-1-2:2004+A1:2015BS EN 60811- 401BS EN 60811-501BS EN 60811-502BS EN 62230BS EN ISO 6892-1IEC 60050-461BS 6724BS 7671:2008+A3:2015BS 8512BS 8573:2012BS EN 50262BS EN 50393BS EN 60079-14BS EN 61914BS EN 62275BS EN 62444IEC 60183《2002年电力安全、质量和连续性法规》取代了BS 5467:1997+A3:2008，该法规仍然有效。购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS 5467:2016 specifies requirements for the construction and performance of thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V.This British Standard is applicable to cables for use in fixed installations in industrial areas, buildings or similar applications.This British Standard specifies requirements for the following types of cables:600/1 000 V cables, wire armoured and oversheathed, having single-core, two-, three-, four- and five-core stranded copper conductor;600/1 000 V multicore auxiliary cables, wire armoured and oversheathed, stranded copper conductor; and1 900/3 300 V cables, wire armoured and oversheathed, having single-core or three-core stranded copper conductor.This British Standard is applicable to cables that are designed for a maximum sustained conductor temperature of 90 °C and for a maximum short-circuit conductor temperature of 250 °C (for a maximum of 5 s).NOTE 1 Limitation on the temperature of the cables may be imposed in situations where they might be touched or where they could touch other materials.NOTE 2 Annex A gives a guide to the use and installation of cables, Annex B gives armour wire tests, Annex C gives a compatibility test, Annex D gives an abrasion resistance test, Annex E gives an insulation resistance constant test on oversheath, Annex F gives the resistance of conductor and armour, Annex G gives the gross cross-sectional area of armour, Annex H gives a test for shrinkage of oversheath on cable, Annex I gives guidance on type tests and Annex J gives the standard United Kingdom reference codes.Cross References:BS 7655-1.2BS 7655-1.3BS 7655-4.2BS EN 10244-2:2009BS EN 50395BS EN 50396BS EN 60228BS EN 60229BS EN 60332-1-2:2004+A1:2015BS EN 60811-401BS EN 60811-501BS EN 60811-502BS EN 62230BS EN ISO 6892-1IEC 60050-461BS 6724BS 7671:2008+A3:2015BS 8512BS 8573:2012BS EN 50262BS EN 50393BS EN 60079-14BS EN 61914BS EN 62275BS EN 62444IEC 60183The Electricity Safety, Quality and Continuity Regulations 2002Replaces BS 5467:1997+A3:2008 which remains current.All current amendments available at time of purchase are included with the purchase of this document.