ASCE的《冷成型不锈钢结构件设计标准规范》（ASCE 8-02）提供了用于确定建筑物和其他静载结构中使用的不锈钢结构件和连接件强度的设计标准。构件可以由退火和冷轧薄板、带材、板材或扁钢材料冷成型。提供了轴向荷载拉伸或压缩构件、承受弯曲和剪切的受弯构件以及承受组合轴向荷载和弯曲的构件的设计标准。本规范提供了使用荷载和阻力系数设计（LRFD）和容许应力设计（ASD）方法的设计强度标准。本文还介绍了本规范各项规定背后的理由和理由。 本标准的设计强度要求旨在供结构工程师以及参与编制和管理当地建筑规范的人员使用。目录 1.一般规定 2.要素 3.成员 4.结构组件 5.连接和接头 6.测试

ASCE's standard Specification for the Design of Cold-Formed Stainless Steel Structural Members (ASCE 8-02) provides design criteria for the determination of the strength of stainless steel structural members and connections for use in buildings and other statically loaded structures. The members may be cold-formed to shape from annealed and cold-rolled sheet, strip, plate, or flat bar stainless steel material. Design criteria are provided for axially loaded tension or compression members, flexural members subjected to bending and shear, and members subjected to combined axial load and bending.The specification provides the design strength criteria using load and resistance factor design (LRFD) and the allowable stress design (ASD) methods. The reasoning behind, and the justification for, various provisions of the specification are also presented. The design strength requirements of this standard are intended for use by structural engineers and those engaged in preparing and administrating local building codes.Table of Contents 1. General Provisions 2. Elements 3. Members 4. Structural Assemblies 5. Connections and Joints 6. Tests