首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D3548-09(2023)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Ethyl Acrylate 丙烯酸乙酯标准规范
发布日期: 2023-07-01
1.1 本规范涵盖丙烯酸乙酯(99 % 等级),用于油漆、清漆、清漆和相关产品。 1.2 以下内容适用于本标准中的所有规定限值;为了确定是否符合本标准,观测值或计算值应按照实践中的四舍五入方法,在表示规格限值时使用的最后一个右手数字中“四舍五舍五入到最近的单位” E29 。 1.3 以国际单位制表示的数值应视为标准。本标准中不包括其他计量单位。 1.4 有关规范危险信息和指南,请参阅本规范中所列材料的供应商安全数据表。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 具体危害说明见 4.1 。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers ethyl acrylate (99 % grade) for use in paint, varnish, lacquer, and related products. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For specification hazard information and guidance, see the supplier’s Safety Data Sheet for materials listed in this specification. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in 4.1 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D01.35
相似标准/计划/法规
现行
ASTM D4416-09(2023)
Standard Specification for Acrylic Acid
丙烯酸标准规范
2023-07-01
现行
ASTM D7733-12(2021)
Standard Specification for Acrylic Dispersion Ground
丙烯酸分散地面的标准规范
2021-11-01
现行
ASTM F451-21
Standard Specification for Acrylic Bone Cement
丙烯酸骨水泥标准规范
2021-03-15
现行
ASTM D4614-11(2019)
Standard Specification for Ethyl Acetate (All Grades)
乙酸乙酯(所有等级)的标准规范
2019-04-01
现行
ASTM D5098-16(2021)
Standard Specification for Artists' Acrylic Dispersion Paints
艺术家丙烯酸分散涂料的标准规范
2021-11-01
现行
ASTM D740-11(2019)
Standard Specification for Methyl Ethyl Ketone,
甲乙酮的标准规范
2019-04-01
现行
ASTM D787-18
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
乙基纤维素成型和挤出化合物的标准规范
2018-04-01
现行
ASTM D6083/D6083M-24
Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing
屋面用液体丙烯酸涂料的标准规范
2024-01-01
现行
ASTM F3087-15(2024)
Standard Specification for Acrylic Molding Resins for Medical Implant Applications
医疗植入物用丙烯酸模塑树脂标准规范
2024-09-15
现行
ASTM D4802-16
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
聚(甲基丙烯酸甲酯)丙烯酸塑料片的标准规格
2016-05-01
现行
ASTM D8397-23
Standard Specification for Acrylic and Reactive Adhesives for Installation of Vinyl and Rubber Floor Coverings
乙烯基和橡胶地板覆盖物安装用丙烯酸和反应性粘合剂的标准规范
2023-08-01
现行
ASTM D7618-13(2021)
Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
与航空火花点火发动机燃料混合用乙基叔丁基醚(ETBE)的标准规范
2021-07-01
现行
ASTM D8235-21
Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
作为汽车火花点火发动机燃料与汽油混合用乙基叔丁基醚(ETBE)的标准规范
2021-07-01
现行
ASTM D6865-17
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
丙烯腈的标准分类体系和规范依据–;苯乙烯&x2013;丙烯酸酯(ASA)和丙烯腈–;三元乙丙橡胶&x2013;苯乙烯(AES)塑料和合金模塑和挤压材料
2017-03-01