首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D4416-09(2023)
到馆提醒
收藏跟踪
购买正版
Standard Specification for Acrylic Acid 丙烯酸标准规范
发布日期: 2023-07-01
1.1 本规范涵盖冰川丙烯酸 2. (99.0 % 等级),用于油漆、清漆、清漆和相关产品。 1.2 以下内容适用于本标准中的所有规定限值;为了确定是否符合本标准,观测值或计算值应按照实践中的四舍五入方法,在表示规格限值时使用的最后一个右手数字中“四舍五舍五入到最近的单位” E29 。 1.3 以国际单位制表示的数值应视为标准。本标准中不包括其他计量单位。 1.4 有关危险信息和指南,请参阅供应商的安全数据表。 1.5 本标准并非旨在解决与其使用相关的所有安全问题(如有)。 本标准的使用者有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 有关具体危险说明,请参阅第节 6. 。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。
1.1 This specification covers glacial acrylic acid 2 (99.0 % grade) for use in paint, varnish, lacquer and related products. 1.2 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29 . 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 For hazard information and guidance, see the supplier’s Safety Data Sheet. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6 . 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D01.35
相似标准/计划/法规
现行
ASTM D3548-09(2023)
Standard Specification for Ethyl Acrylate
丙烯酸乙酯标准规范
2023-07-01
现行
ASTM D7733-12(2021)
Standard Specification for Acrylic Dispersion Ground
丙烯酸分散地面的标准规范
2021-11-01
现行
ASTM F451-21
Standard Specification for Acrylic Bone Cement
丙烯酸骨水泥标准规范
2021-03-15
现行
ASTM D5098-16(2021)
Standard Specification for Artists' Acrylic Dispersion Paints
艺术家丙烯酸分散涂料的标准规范
2021-11-01
现行
ASTM D6083/D6083M-24
Standard Specification for Liquid-Applied Acrylic Coating Used in Roofing
屋面用液体丙烯酸涂料的标准规范
2024-01-01
现行
ASTM F3087-15(2024)
Standard Specification for Acrylic Molding Resins for Medical Implant Applications
医疗植入物用丙烯酸模塑树脂标准规范
2024-09-15
现行
ASTM D4802-16
Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
聚(甲基丙烯酸甲酯)丙烯酸塑料片的标准规格
2016-05-01
现行
ASTM D8397-23
Standard Specification for Acrylic and Reactive Adhesives for Installation of Vinyl and Rubber Floor Coverings
乙烯基和橡胶地板覆盖物安装用丙烯酸和反应性粘合剂的标准规范
2023-08-01
现行
ASTM E1146-23
Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
盐酸(工业级盐酸)标准规范
2023-04-01
现行
ASTM D3620-04(2023)
Standard Specification for Glacial Acetic Acid
冰醋酸标准规范
2023-07-01
现行
ASTM D7976-14(2020)
Standard Specification for Purified Terephthalic Acid (PTA)
纯化对苯二甲酸(PTA)的标准规格
2020-02-01
现行
ASTM D8062-23
Standard Specification for Purified Terephthalic Acid (PTA) with Low p-Toluic Acid
含低浓度甲苯的精对苯二甲酸(PTA)标准规范
2023-01-01
现行
ASTM D6909-10(2023)
Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
耐高温和耐酸的氟碳三元聚合物弹性体的标准规范
2023-06-15
现行
ASTM E3131-17(2024)
Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
可疑可见粉末细菌病原体筛查用核酸系统的标准规范
2024-07-01
现行
ASTM D6865-17
Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
丙烯腈的标准分类体系和规范依据–;苯乙烯&x2013;丙烯酸酯(ASA)和丙烯腈–;三元乙丙橡胶&x2013;苯乙烯(AES)塑料和合金模塑和挤压材料
2017-03-01