1.1本实施规程提供了一种方法，用于指定测量角度和空间条件，以及在少量几何条件下测量不透明角视材料光谱反射率因子的方法的角度选择性。 1.2用于表征反光材料外观的测量具有特殊性质，因此在其他ASTM文件中对其进行了处理，不包括在本标准的范围内。 1. 3. 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 本规程适用于测量视角材料外观的仪器制造商和用户、编写此类仪器标准规范的人员以及希望精确规定多角度分光光度法几何条件的其他人员。 工业应用的一个突出例子是材料供应商和汽车制造商常规应用此类测量来测量金属涂料和塑料的颜色。

1.1 This practice provides a way of specifying the angular and spatial conditions of measurement and angular selectivity of a method of measuring the spectral reflectance factors of opaque gonioapparent materials, for a small number of sets of geometric conditions. 1.2 Measurements to characterize the appearance of retroreflective materials are of such a special nature that they are treated in other ASTM documents and are not included in the scope of this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== This practice is for the use of manufacturers and users of instruments to measure the appearance of gonioapparent materials, those writing standard specifications for such instruments, and others who wish to specify precisely the geometric conditions of multiangle spectrophotometry. A prominent example of industrial usage is the routine application of such measurements by material suppliers and automobile manufacturers to measure the colors of metallic paints and plastics.