ISO 10094-1:2021-气动流体动力.电动气动压力控制阀.第1部分:供应商文献中包含的主要特性-国家数字标准馆

现行 ISO 10094-1:2021

到馆阅读

收藏跟踪

购买正版

Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier's literature 气动流体动力.电动气动压力控制阀.第1部分:供应商文献中包含的主要特性

发布日期： 2021-11-22

                本文件规定了供应商文件中应包含的电动气动连续压力控制阀的特性。
根据ISO？5598，这些控制阀包括:
-？电动调节气动比例压力阀，
-？无电子压力反馈的比例压力控制阀，以及
-？带有电子压力反馈的比例压力控制阀。
本文件仅限于带有大气排气口的部件的特性描述。
注？1？ISO？6953？1规定了非电动调节气动压力控制阀的特性。
注2:ISO 10041-1规定了电动气动连续流量控制阀的特性。

This document specifies which characteristics of electro-pneumatic continuous pressure control valves are to be included in the supplier's literature.
In accordance with ISO 5598, these control valves include:
—    electrically modulated pneumatic proportional pressure valves,
—    proportional pressure control valves without electronic pressure feedback, and
—    proportional pressure control valves with electronic pressure feedback.
This document is limited to the characterization of components with an exhaust port to the atmosphere.
NOTE 1   The characteristics of non-electrically modulated pneumatic pressure control valves are specified in ISO 6953？1.
NOTE 2   The characteristics of electro-pneumatic continuous flow control valves are specified in ISO 10041？1.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.100.50流体动力系统 - 控制部件

关联关系

研制信息

归口单位： ISO/TC 131/SC 5

相似标准/计划/法规

BS ISO 10094-1-2021

Pneumatic fluid power. Electro-pneumatic pressure control valves-Main characteristics to include in the supplier's literature
气动流体动力电动气动压力控制阀

GB/T 39956.1-2021

气动电-气压力控制阀第1部分：商务文件中应包含的主要特性
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 1:Main characteristics to include in the supplier's literature

BS ISO 10094-2-2021

Pneumatic fluid power. Electro-pneumatic pressure control valves-Test methods to determine main characteristics to include in the supplier's literature
气动流体动力电动气动压力控制阀

BS ISO 10041-1-2010

Pneumatic fluid power. Electro-pneumatic continuous flow control valves-Main characteristics to include in the supplier's literature
气动流体动力电动气动连续流量控制阀

GB/T 39956.2-2021

气动电-气压力控制阀第2部分：评定商务文件中应包含的主要特性的试验方法
Pneumatic fluid power—Electro-pneumatic pressure control valves—Part 2: Test methods to determine main characteristics to include in the supplier's literature

ISO 10094-2-2021

Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
气压传动.电动气压控制阀.第2部分:确定供应商文献中主要特性的试验方法

ISO 10041-1-2010

Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 1: Main characteristics to include in the supplier's literature
气动流体动力——电动气动连续流量控制阀第1部分:供应商提供的主要特性&apos；中国文学

BS ISO 10041-2-2010

Pneumatic fluid power. Electro-pneumatic continuous flow control valves-Test methods to determine main characteristics to include in the supplier's literature
气动流体动力电动气动连续流量控制阀

气动换向阀技术条件
Rules relating of pneumatic fluid power directional control valve

ISO 10041-2-2010

Pneumatic fluid power — Electro-pneumatic continuous flow control valves — Part 2: Test methods to determine main characteristics to include in the supplier's literature
气动流体动力——电动气动连续流量控制阀第2部分:确定供应商提供的主要特性的试验方法&apos；中国文学

NFPA(Fluid) T3.21.8 R1-2008(R2018)

Pneumatic fluid power--Measurement of response time --Directional control valves
气动流体动力响应时间的测量定向控制阀

GB/T 22107-2008

气动方向控制阀切换时间的测量
Pneumatic fluid power - Directional control valves - Measurement of shifting time

Pneumatic fluid power — Directional control valves — Measurement of shifting time
气压传动.方向控制阀.转换时间的测量

BS 09/30196753 DC

BS ISO 10041-1. Pneumatic fluid power. Electro-pneumatic continuous flow control valves. Part 1. Main characteristics to include in the supplier's literature
BS ISO 10041-1 气动流体动力电动气动连续流量控制阀第一部分供应商文献中包含的主要特征

BS ISO 11727-1999

Pneumatic fluid power. Identification of ports and control mechanisms of control valves and other components
气动流体动力控制阀和其他部件的端口和控制机构标识

GB/T 32215-2015

气动控制阀和其他元件的气口和控制机构的标识
Pneumatic fluid power—Identification of ports and control mechanisms of control valves and other components

Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components
气动流体动力——控制阀和其他部件端口和控制机构的标识

BS ISO 19973-2-2015+A1-2019

Pneumatic fluid power. Assessment of component reliability by testing-Directional control valves
气动流体动力通过测试评估部件可靠性

NFPA(Fluid) T3.21.4 R2-2000(R2019)

Pneumatic valve - Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for verifying the fatigue and establishing the burst pressure ratings of the pressure containing envelope of a metal fluid power pneumatic valve
气动阀——NFPA/T2的压力等级补充 6.1 R2-2000 流体动力部件-金属流体动力气动阀承压外壳疲劳验证和确定爆破压力额定值的方法

JIS B 8419-2010

Pneumatic fluid power -- Directional control valves -- Measurement of shifting time and response time
气动流体动力方向控制阀换档时间和响应时间的测量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统