序言这是CSA B45的第二版。11/IAPMO Z401，玻璃管道装置。它取代了2011年出版的前一版。该版本包括以下更改:a）修订的热冲击试验；和b）与其他标准一致的经修订的翘曲试验程序。范围1。1本标准涵盖了由玻璃制成的盥洗室和水槽，并规定了试验方法、性能要求和标记要求。1.2在本标准中，“应”用于表示要求，即用户为遵守本标准而有义务满足的规定；“应该”用于表示建议或建议但不需要的建议；“可”用于表示一个选项或在标准范围内允许的选项。注释随附条款不包括要求或替代要求； 随附条款的注释的目的是将解释性或信息性材料与文本分开。表和图的注释被视为表或图的一部分，可以作为要求编写。附件被指定为规范性（强制性）或信息性（非强制性）以定义其应用。1.3国际单位制是加拿大的记录单位。在本标准中，英寸/磅单位显示在括号中。每个测量系统中规定的值在应用中是等效的；然而，每个系统都要独立使用。合并两个测量系统的值可能会导致不符合本标准。所有提到加仑的地方都是指我们加仑。有关本标准中使用的转换标准的信息，请参见附录A。

PrefaceThis is the second edition of CSA B45.11/IAPMO Z401, Glass plumbing fixtures. It supersedes the previous edition published in 2011. This edition include the following changes: a) a revised thermal shock test; and b) a revised warpage test procedure to be consistent with other standards.Scope1.1 This Standard covers lavatories and sinks made of glass and specifies test methods, performance requirements, and marking requirements. 1.2 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.3 SI units are the units of record in Canada. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application; however, each system is to be used independently. Combining values from the two measurement systems can result in non-conformance with this Standard. All references to gallons are to US gallons. For information on the conversion criteria used in this Standard, see Annex A.