BS EN IEC 62677-2:2018给出了热收缩低压和中压的试验方法 适用于隔热的各种配置和材料的模制形状， 连接器/电缆的环境密封、机械保护和应变消除 终止和多路转换。规定的试验旨在控制模制形状的质量，但实际上并非如此 确认其设计用于低压和中压电缆附件 因此，电气性能将作为组件的一部分进行验证。这方面的例子 在EN 50393、HD 629.1和IEC 60502-4中有描述。交叉引用:IEC 60216-4-2:2000ISO 11358-2:2014 ED2ISO 846:1997IEC 60216-4-1:2006ISO 62:2008 Ed 3EN 60212（IEC 60212: 2010）ASIEC 62631-3-1:2016IEC 60250:1969ISO 11358-1:2014 ED1EN ISO 11358-1（ISO 11358-1:2014）ASIEC 60243-1EN 60695-11-10（IEC 60695-11-10:2013）ASIEC 60587:2007IEC 60212:2010EN 62631-3-1（IEC 62631-3-1:2016）ASIEC 60695-11-10:2013EN ISO 4892-3（ISO 4892-3:2016）ASEN ISO 62:2008IEC 62677-3EN 6058EN ISO 846:1997EN 50393:2006EN 50393CIEC 60502-4IEC 62677-3-103EN IEC 62677-1IEC 62677-1IEC 62677-1IEC 62677-10237购买本文件。

BS EN IEC 62677-2:2018 gives methods of test for heat shrinkable low and medium voltage moulded shapes in a range of configurations and materials suitable for insulation, environmental sealing, mechanical protection and strain relief for connector/cable terminations and multi-way transitions.The tests specified are designed to control the quality of the moulded shapes but it is recognized that they are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4.Cross References:IEC 60216-4-2:2000ISO 11358-2:2014 ED2ISO 846:1997IEC 60216-4-1:2006ISO 62:2008 Ed 3EN 60212 (IEC 60212:2010) ASIEC 62631-3-1:2016IEC 60250:1969ISO 11358-1:2014 ED1EN ISO 11358-1 (ISO 11358-1:2014) ASIEC 60243-1:2013EN 60243-1 (IEC 60243-1:2013) ASISO 4892-3:2016ISO 11357-3:2011 Ed 2EN ISO 11357-3 (ISO 11357-3:2011) ASEN 60695-11-2 (IEC 60695-11-2:2013) ASEN 60216-4-1 (IEC 60216-4-1:2006) ASIEC 60695-11-2:2013EN 60216-4-2 (IEC 60216-4-2:2000.)EN 60695-11-10 (IEC 60695-11-10:2013)ASIEC 60587:2007IEC 60212:2010EN 62631-3-1 (IEC 62631-3-1:2016) ASIEC 60695-11-10:2013EN ISO 4892-3 (ISO 4892-3:2016) ASEN ISO 62:2008IEC 62677-3EN 60587EN ISO 846:1997EN 50393:2006EN 50393IEC 60502-4IEC 62677-1IEC 62677-3-103EN IEC 62677-1IEC 62677-3-101IEC 62677-3-102HD 629.1ISO 37All current amendments available at time of purchase are included with the purchase of this document.