BS EN IEC 62677-3-101:2018适用于一定范围内的热收缩低压模压型材 适用于绝缘、环境密封、机械保护和应变的配置 电力电缆终端、接头和止动端的卸压。这些模制的形状已经过加工 发现适合在-40°C和100°C之间的温度下使用。模制形状可提供预涂粘合剂。粘合剂指南 附件A中给出了兼容性和温度性能。制造商/供应商 可以咨询您的选择。交叉引用: EN IEC 62677-1IEC 60757IEC 62677-1IEC 62677-2EN 60296HD 457 S1ISO 868EN ISO 868IEC 60296EN ISO 846ISO 846EN IEC 62677-2HD 629EN 60684-3-214（IEC 60684-3-214:2013）ASIEC 60502-1:2004IEC 60684-3-247:2011EN 50393:2006EN 60684-3-247（IEC 60684-3-247:2011）ASIEC 60684-3-214:2013购买本文件时可提供的所有现行修订版。

BS EN IEC 62677-3-101:2018 is applicable to heat shrinkable low voltage moulded shapes in a range of configurations suitable for insulation, environmental sealing, mechanical protection, strain relief for power cable terminations, joints and stop ends. These moulded shapes have been found suitable for use for temperatures between -40 °C and 100 °C.The moulded shapes can be supplied with a pre-coated adhesive. A guide to adhesive compatibility and temperature performance is given in Annex A. The manufacturers/suppliers can be consulted for options.Cross References:EN IEC 62677-1IEC 60757IEC 62677-1IEC 62677-2EN 60296HD 457 S1ISO 868EN ISO 868IEC 60296EN ISO 846ISO 846EN IEC 62677-2HD 629EN 60684-3-214 (IEC 60684-3-214:2013)ASIEC 60502-1:2004IEC 60684-3-247:2011EN 50393:2006EN 60684-3-247 (IEC 60684-3-247:2011)ASIEC 60684-3-214:2013All current amendments available at time of purchase are included with the purchase of this document.