BS ISO 16656:2016规定了单杆短冲程气缸的安装尺寸 孔直径为32毫米至100毫米，在10兆帕（100巴）压力下使用，有或没有磁性功能，如 要求这些常用液压缸具有互换性。注1:本国际标准旨在提供基本指南，同时允许制造商 液压设备在气缸设计上的灵活性不限制技术的发展。注2:这些气缸的尺寸很可能需要最小的安装空间。注3:1巴=0.1兆帕=105Pa；1 MPa=1 N/mm²。交叉引用:ISO 273ISO 965-3ISO 1179-1ISO 3320ISO 4393ISO 4395ISO 5598ISO 6099ISO 6149-1购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS ISO 16656:2016 establishes mounting dimensions for single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) with or without magnetic functions, as required for interchangeability of these commonly used hydraulic cylinders.NOTE 1 This International Standard is intended to provide basic guidelines while allowing manufacturers of hydraulic equipment flexibility in the design of cylinders and not restricting technical development.NOTE 2 The dimensions of these cylinders are most likely to require a minimum of space for mounting.NOTE 3 1 bar = 0,1 MPa = 105Pa; 1 MPa = 1 N/mm².Cross References:ISO 273ISO 965-3ISO 1179-1ISO 3320ISO 4393ISO 4395ISO 5598ISO 6099ISO 6149-1All current amendments available at time of purchase are included with the purchase of this document.