1.1这些试验方法涵盖了用于评估拘留所和教养所摆动门组件中使用的锁的正常操作性能和攻击条件下的性能特征的装置、程序和验收条件。因此，它们仅指示锁在实际服务中的性能特征。未考虑安装和维护条件等变量。 1.2这些测试方法的目的是帮助确保拘留锁的性能达到或高于最低可接受水平，以控制进入未经授权或安全区域的通道，限制囚犯，并延迟和挫败越狱企图，抵制故意破坏行为。 众所周知，为了满足这些试验方法的目的，车门和门框总成必须与试验方法要求的性能水平兼容 F1450 . 1.3以英寸-磅为单位的数值应视为标准值。括号中的值仅供参考。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 拘留和管教行政官员的一个主要关切是其设施中使用的锁的可靠运行。这些试验方法有助于为摆动门组件的锁指定物理安全性和性能水平。 这些测试方法评估锁对使用敲击装置、撬动装置和火灾的攻击的抵抗力。这些测试方法还评估了锁在模拟操作条件下的性能。这些测试方法不提供对受到化学试剂、弹道、炸药或其他极端攻击方法攻击的锁的阻力或性能的测量。 这些测试方法不测量设备在受到雨、雪或风载灰尘或沙子等环境因素影响时的电阻或性能。如果此类元件可能是一个因素，则应咨询制造商以确定正确应用。 这些测试方法的主要目的是估算拘留所和教养所中门锁的滥用程度和操作条件。这些测试方法的预期结果将为管教人员、公众和囚犯提供保护措施。 建议拘留/改造设施管理部门提供足够的培训、监督和预防性维护计划，以使门组件在整个预期使用寿命内按预期运行。

1.1 These test methods cover the apparatus, procedures, and acceptance conditions for evaluating the normal operational performance and the performance characteristics under assault conditions of locks used in swinging door assemblies in detention and correctional institutions. Thus, they give only an indication of the performance characteristics of locks in actual service. Such variables as installation and maintenance conditions are not considered. 1.2 It is the intent of these test methods to help ensure that detention locks perform at or above minimum acceptable levels to control passage to unauthorized or secure areas, to confine inmates, and to delay and frustrate escape attempts and resist vandalism. It is recognized that in order to meet the intent of these test methods, door and frame assemblies must be compatible with the level of performance required by Test Methods F1450 . 1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== A major concern for detention and correctional administrative officials is the reliable operation of locks used in their facilities. These test methods aid in assigning a level of physical security and performance to locks for swinging door assemblies. These test methods evaluate the resistance of a lock to attacks using battering devices, prying devices, and fire. These test methods also evaluate the performance of a lock under simulated operating conditions. These test methods do not provide a measure of the resistance or performance of a lock subjected to attack by chemical agents, ballistics, explosives, or other extreme methods of attack. These test methods do not measure the resistance or performance of the device when subjected to environmental elements such as rain, snow, or wind-carried dust or sand. Where such elements may be a factor, the manufacturer should be consulted for proper application. The primary purpose of these test methods is to approximate the levels of abuse and operating conditions to which locks are subjected in detention and correctional institutions. The desired result of these test methods will provide a measure of assurance of protection to the correctional personnel, public, and inmates. It is recommended that the detention/correctional facility administration provide adequate training, supervision, and preventative maintenance programs to enable door assemblies to function as intended throughout the expected service life.