现行

MIL MS51999 Notice 3-Validation 3

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

2006-08-25

现行

MIL MS51999 Notice 1-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

1988-05-20

现行

MIL MIL-S-45909C Supplement 1

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-S-45909B) (S/S BY NASM45909-1999)
STUD LOCKED IN RING LOCKED SERRATED General规格（取代MIL-S-45909B）（S/S BY NASM45909-1999）

1989-03-27

现行

SAE AS51989C

STUD, LOCKED IN-RING LOCKED, SERRATED
螺柱 锁紧环锁紧 锯齿形

2018-09-28

现行

SAE AS45909A

Stud, Locked In, Ring Locked, Serrated, General Specification For
螺柱 锁定 环锁定 锯齿形 通用规范

2015-12-06

现行

NASM 45909 Rev.2

Stud, Locked in, Ring Locked, Serrated, General Specification for
锯齿形锁紧环形螺柱通用规范

2016-05-31

现行

SAE AS51992C

STUD, LOCKED-IN RING, SERRATED, HIGH STRENGTH
螺柱 锁紧环 锯齿形 高强度

2018-10-24

现行

MIL MS51999 Notice 4-Validation 4

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓 设计和使用限制

2019-07-24

现行

MIL MS51999 Notice 2-Validation 2

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓 设计和使用限制

2001-09-14

现行

MIL MS51999

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁紧螺柱-齿形锁紧环 设计和使用限制

1967-12-12

现行

MIL MS51497 Notice 1-Inactivation

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱 锁定在环内 锯齿状 高强度 超大更换件

1997-07-18

现行

MIL MS51497

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱 锁环锁紧 锯齿形 高强度 超大替换件

1985-03-11

现行

DOD DOD-S-63275A

STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC & RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-S-63275)
米制和米制带齿锁紧环锁紧锁紧内螺纹双头螺栓通用规范（替代DOD-S-63275）

1982-10-29

现行

MIL MS51551 Notice 1-Inactivation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

1998-01-19

现行

MIL MS51551

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧 锯齿形 UNJF螺纹螺母端 增加螺柱端长度

1987-05-12

现行

MIL MS51551 Notice 2-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱 锁定在环内 锯齿状 无螺纹螺母端 增加螺柱端长度

2019-06-11

现行

SAE AS51990C

RING, LOCK, SERRATED
锯齿锁紧环

2020-02-10

现行

MIL MS51989A Notice 2-Cancellation

STUD, LOCKED IN-RING LOCKED, SERRATED (SUPERSEDING MS51989) (S/S BY SAE-AS51989)
锯齿形锁紧环内螺柱（取代MS51989）（由SAE-AS51989提供）

1999-10-15

现行

MIL MS51989A Amendment 1

STUD, LOCKED IN-RING LOCKED, SERRATED (SUPERSEDING MS51989) (S/S BY SAE-AS51989)
锯齿形锁紧环内螺柱（取代MS51989）（由SAE-AS51989提供）

1996-03-26

现行

MIL MS51989A Notice 1-Validation

STUD, LOCKED IN-RING LOCKED, SERRATED (SUPERSEDING MS51989) (S/S BY SAE-AS51989)
锯齿形锁紧环内螺柱（取代MS51989）（由SAE-AS51989提供）

1988-06-06