NASM 45909 Rev.2-锯齿形锁紧环形螺柱通用规范-国家数字标准馆

现行 NASM 45909 Rev.2

到馆提醒

收藏跟踪

购买正版

Stud, Locked in, Ring Locked, Serrated, General Specification for 锯齿形锁紧环形螺柱通用规范

发布日期： 2016-05-31

本规范涵盖了锁定螺柱的要求。锁紧螺柱的方法是通过锯齿状轴环和附件锁环，在母材内安装匹配的锯齿，以防止旋转。

This specification covers the requirements for locked-in studs. The method of locking in the stud is by means of a serrated collar and an accessory lockring with matching serrations installed within the parent material to prevent rotation.

分类信息

发布单位或类别：美国-航空航天工业协会 - 国家航空航天标准

关联关系

研制信息

相似标准/计划/法规

MIL MS51999 Notice 3-Validation 3

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

MIL MS51999 Notice 1-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
STUD LOCKED IN-RING LOCKED SERRATED DESIGN AND USAGE LIMITATIONS FOR

MIL MIL-S-45909C Supplement 1

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-S-45909B) (S/S BY NASM45909-1999)
STUD LOCKED IN RING LOCKED SERRATED General规格（取代MIL-S-45909B）（S/S BY NASM45909-1999）

Stud, Locked In, Ring Locked, Serrated, General Specification For
螺柱锁定环锁定锯齿形通用规范

STUD, LOCKED IN-RING LOCKED, SERRATED
螺柱锁紧环锁紧锯齿形

KS W 1611(2019 Confirm)

항공우주 - 톱니형 링 잠금스터드
航空航天锯齿环锁紧螺柱

DOD DOD-S-63275A

STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC & RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR (SUPERSEDING DOD-S-63275)
米制和米制带齿锁紧环锁紧锁紧内螺纹双头螺栓通用规范（替代DOD-S-63275）

MIL MS51999 Notice 4-Validation 4

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓设计和使用限制

MIL MS51999 Notice 2-Validation 2

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁定在环内的锯齿形双头螺栓设计和使用限制

STUD, LOCKED IN - RING LOCKED, SERRATED, DESIGN AND USAGE LIMITATIONS FOR
锁紧螺柱-齿形锁紧环设计和使用限制

STUD, LOCKED-IN RING, SERRATED, HIGH STRENGTH
螺柱锁紧环锯齿形高强度

MIL MS51497 Notice 1-Inactivation

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱锁定在环内锯齿状高强度超大更换件

STUD, LOCKED IN-RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER
螺柱锁环锁紧锯齿形高强度超大替换件

MIL MIL-DTL-45910D

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
螺纹锁紧和环锁紧锯齿嵌件通用规范

MIL MIL-DTL-45910D Notice 1-Validation 1

Insert, Screw Thread-Locked in and Ring Locked, Serrated General Specification for
带锯齿的螺纹锁紧和环锁紧嵌件通用规范

MIL MIL-S-45909C Notice 1-Cancellation

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-S-45909B) (S/S BY NASM45909-1999)
锯齿形锁紧环内双头螺栓（代替MIL-S-45909B）的通用规范

MIL MIL-S-45909C

STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (SUPERSEDING MIL-S-45909B) (S/S BY NASM45909-1999)
一般规范（替代MIL-S-45909B）（NASM45909-1999标准S/S）

MIL MS51551 Notice 1-Inactivation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱锁定在环内锯齿状无螺纹螺母端增加螺柱端长度

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
锁紧螺柱-环形锁紧锯齿形 UNJF螺纹螺母端增加螺柱端长度

MIL MS51551 Notice 2-Validation 1

STUD, LOCKED IN - RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
螺柱锁定在环内锯齿状无螺纹螺母端增加螺柱端长度

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统