本文件规定了气缸杆端U形夹互换性所需的安装尺寸。杆端U形夹专门设计用于根据ISO 6432和ISO 15552制造的1000 kPa[10 bar1]系列气缸，但这并不限制其应用。 U形夹用于气缸的活塞杆上，以机械方式传递气缸力。根据ISO 6432、ISO 15552和ISO 21287的规定，U形夹的设计基于气缸内径和压力产生的最大力。 1 1巴=100千帕=105帕；1帕=1牛顿/平方米。

This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application. The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287. 1 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.