本文件通过参考ISO 230的相关部分，规定了以下几种试验系列: 带有水平或垂直主轴或不同类型通用头的加工中心， 独立或集成在灵活的制造系统中。本文件还确立了 与一般用途和试验结果相对应的公差或最大可接受值 普通精度加工中心。 本文件也完全或部分适用于数控铣削和镗孔 当机器的配置、部件和运动与测试兼容时 如本文所述。 本文件规定了参考ISO 230的标准试样- 1、精加工下的切削试验 条件它还规定了试样本身的特性和尺寸。这 本文件旨在提供评估刀具切割精度的最低要求 具有3到5个同时加工轴的加工中心。附录A介绍了一种自由形式的试件 适用于五轴加工中心。该加工试验适用于使用五轴的加工中心 自由曲面的侧面铣削。交叉引用:ISO 230-1ISO 1101:2017ISO 6462ISO 230-4ISO 1832ISO 26303ISO 129-1ISO 2768-1购买时可用的所有当前修订版均包含在本文件的购买中。

This document specifies, by reference to the relevant parts of ISO 230, several families of tests for machining centres with horizontal or vertical spindle or with universal heads of different types, standing alone, or integrated in flexible manufacturing systems. This document also establishes the tolerances or maximum acceptable values for the test results corresponding to general purpose and normal accuracy machining centres. This document is also applicable, totally or partially, to numerically controlled milling and boring machines, when their configuration, components, and movements are compatible with the tests described herein. This document specifies standard test pieces with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This document is intended to supply minimum requirements for assessing the cutting accuracy of the machining centres with 3 to 5 simultaneous machining axes. Annex A introduces a freeform test piece for five-axis machining centres. This machining test is applied to machining centres using five-axis flank milling of freeform surfaces.Cross References:ISO 230-1ISO 1101:2017ISO 6462ISO 230-4ISO 1832ISO 26303ISO 129-1ISO 2768-1All current amendments available at time of purchase are included with the purchase of this document.