IEC 62893-4-1:2020-额定电压0.6/1kv及以下电动汽车用充电电缆.第4-1部分:根据IEC 61851-1模式4的直流充电电缆.不使用热管理系统的直流充电-国家数字标准馆

现行 IEC 62893-4-1:2020

到馆阅读

收藏跟踪

购买正版

Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system 额定电压0.6/1kv及以下电动汽车用充电电缆.第4-1部分:根据IEC 61851-1模式4的直流充电电缆.不使用热管理系统的直流充电

发布日期： 2020-05-07

IEC 62893-4-1:20 20适用于根据IEC 61851-1模式4进行DC充电的电缆。这些电缆不适用于IEC 61851-23中规定的热管理系统。
IEC 62893（所有部件）中规定的充电电缆旨在用于II类设备的电器。
本文件中电缆的最高导体工作温度为90°C。
IEC 62893-2、IEC 60245-2、IEC 60332-1-2、IEC 62821？1:20 15，附录B和IEC 60811的相关部分。
IEC 62440旨在与本文件第5条一起用作本文件中电缆安全使用的指南。
本文件应与IEC 62893-1:20 17和IEC 62893-2:20 17一起阅读。

IEC 62893-4-1:2020 applies to cables for DC charging according to mode 4 of IEC 61851-1. These cables are not intended to be used with a thermal management system such as that specified in IEC 61851-23.

Charging cables specified in IEC 62893 (all parts) are intended to be used for electrical appliances of class II equipment.

The maximum conductor operating temperature for the cables in this document is 90 °C.

The test methods specified are given in IEC 62893-2, IEC 60245-2, IEC 60332-1-2, IEC 62821？1:2015, Annex B and in the relevant parts of IEC 60811.

IEC 62440 is intended to be used as guidance on the safe use of cables in this document together with Clause 5 of this document.

This document is to be read in conjunction with IEC 62893-1:2017 and IEC 62893-2:2017.

分类信息

发布单位或类别：国际组织-国际电工委员会

ICS分类： 29.060.20电线和电缆 - 电缆、 43.120道路车辆工程 - 电车

关联关系

研制信息

归口单位： TC 20

相似标准/计划/法规

KS C IEC 62893-1

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제1부: 일반 요구사항
额定电压0.6/1kV及以下电动车辆用充电电缆第1部分:一般要求

IEC 62893-2-2017

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods
额定电压0.6/1kV及以下电动汽车充电电缆第2部分:试验方法

KS C IEC 62893-2

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제2부: 시험방법
额定电压0.6/1kV及以下电动车辆用充电电缆第2部分:试验方法

KS C IEC 62893-1

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제1부: 일반 요구사항
额定电压0.6/1kV及以下电动车辆用充电电缆.第1部分:一般要求

IEC 62893-1-2017

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
额定电压0.6/1kV及以下电动汽车充电电缆第1部分:一般要求

IEC 62893-1-2017+AMD1-2020 CSV

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
额定电压0.6/1kV及以下电动汽车充电电缆第1部分:一般要求

IEC 62893-3-2017

Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
额定电压0.6/1kv及以下电动汽车充电电缆第3部分:额定电压450/750v及以下的IEC 61851-1模式1、2、3交流充电电缆

IEC 62893-1-2017/AMD1-2020

Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
修改件1.额定电压0.6/1kV及以下电动汽车充电电缆.第1部分:一般要求

KS C IEC 62893-3

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제3부: 정격 전압 450/750 V 이하 KS R IEC 61851-1 모드 1, 2 및 3에 따른 AC 충전용 케이블
额定电压0.6/1kv及以下电动车辆用充电电缆第3部分:额定电压450/750v及以下、符合KS R IEC 61851-1模式1、2和3的交流充电电缆

BS PD IEC TS 62893-4-2-2021

Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV-Cables for DC charging according to mode 4 of IEC 61851-1. Cables intended to be used with a thermal management system
额定电压0.6/1 kV及以下电动车辆用充电电缆

IEC TS 62893-4-2-2021

Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-2: Cables for DC charging according to mode 4 of IEC 61851-1 - Cables intended to be used with a thermal management system
额定电压0.6/1kV及以下电动车辆用充电电缆.第4-2部分:符合IEC 61851-1模式4的直流充电电缆.用于热管理系统的电缆

KS C IEC TS 62893-4-2

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제4-2부: KS R IEC 61851-1 모드 4에 따른 DC 충전 케이블 — 열 관리 시스템과 함께 사용되는 케이블
额定电压0.6/1kV及以下电动车辆用充电电缆.第4-2部分:符合KS R IEC 61851-1模式4的直流充电电缆.用于热管理系统的电缆

KS C IEC 62893-4-1

정격 전압 0.6/1 kV 이하 전기자동차용 충전 케이블 — 제4-1부: KS R IEC 61851-1 모드 4에 따른 DC 충전 케이블 — 열 관리 시스템을 사용하지 않는 DC 충전
额定电压0.6/1kV及以下电动车辆用充电电缆.第4-1部分:符合KS R IEC 61851-1模式4的直流充电电缆.不使用热管理系统的直流充电

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统