SAE J526标准涵盖了用于一般汽车、制冷、液压和其他类似应用的电阻焊接单壁低碳钢压力管，这些应用要求管道具有适合弯曲、扩口、卷边、成型和钎焊的质量。根据本规范生产的材料不打算用于单火炬应用，因为ID焊道或划痕区域可能会导致泄漏路径。在单火炬应用中使用该材料时的风险承担应由生产商和管道采购商之间的协议确定。根据本规范生产的材料用于不需要严重成形和弯曲的压力应用。由于与SAE J356相比，该材料可能表现出降低某些预期成形特性的机械财产，因此在使用根据本规范生产的材料时，应考虑成品组件成形要求的严重性。

The SAE J526 Standard covers electric-resistance welded single-wall low-carbon steel pressure tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a quality suitable for bending, flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications shall be defined by agreement between the producer and tube purchaser. The material produced to this specification is intended to service pressure applications where severe forming and bending is not required. As this material may exhibit mechanical properties that reduce some desired forming characteristics versus SAE J356, the severity of the forming requirements of the finished assembly should be considered when utilizing material produced to this specification.