热式气体质量流量计
Thermal Mass Gas Flowmeters

2017-02-28

气体旋进旋涡流量计
Vortex precession flowmeters for gas

2018-06-07

Standard for Gas Flowmeters, Third Edition
气体流量计标准 第三版

2020-11-05

Procedures of calibration and testing for gas flowmeter
气体流量计的校准和测试程序

2008-01-01

Measurement of Gas Flow by Bellmouth Inlet Flowmeters
用Bellmouth入口流量计测量气体流量

2011-08-01

Wet Gas Flowmetering Guideline (Technical Report)
湿气流量计量指南（技术报告）

2008-07-11

用槽道式流量计测量天然气流量
Measurement of natural gas flow by spindle flowmeters

2019-11-04

Measurement of Gas Flow by Bellmouth Inlet Flowmeters
用Bellmouth入口流量计测量气体流量

2011-08-10

热式气体质量流量计型式评价大纲
Program of Pattern Evaluation of Thermal Mass Gas Flowmeters

2017-02-28

Recommended Practice 85, Use of Subsea Wet-gas Flowmeters in Allocation Measurement Systems
推荐实施规程85 分配测量系统中海底湿气流量计的使用

2003-08-01

Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers
用毛细管热质量流量计和质量流量控制器测量气体流量

2015-10-16

Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
工业气体用斜程渡越时间超声波流量计的选择、安装、操作和校准指南

2013-10-31

BS 7965. Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
英国标准7965 工业气体用斜程渡越时间超声波流量计的选择、安装、操作和校准指南

2008-05-07

Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids
冷冻碳氢化合物液体 动态测量 液化天然气（LNG）和其他冷烃流体用流量计的校准和安装要求和指南

2020-02-10

Draft Document - Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests; German version prEN 13918:2000
文件草案——气焊设备——用于焊接、切割和相关工艺的气瓶上的集成流量计调节器——分类、规范和试验；德文版prEN 13918:2000

2001-01-01

Gas Tungsten Arc Welding With Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）自耗镶块根部的钨极气体保护焊 IN3XX和ER3XX 焊接状态 主要用于管道应用

2001-10-31

Gas Tungsten Arc Welding With Consumable Insert Root Followed by Shieded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
焊接状态下 1/8至1-1/2英寸厚、IN3XX和ER3XX的奥氏体不锈钢（M-8/P-8/S-8 第1组）的自耗镶块根部钨极气体保护焊 然后进行屏蔽金属极电弧焊 主要用于管道应用

2001-10-31

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊接状态下 采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N） 在焊接状态下 采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊 主要用于海军应用的管道

2018-08-03

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications
1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊（自耗镶块根部）标准焊接工艺规范（SWPS） 厚 如焊接状态；1/8至3/4英寸 厚度 焊后热处理条件 IN521和ER90S-B3 主要用于管道应用

1999-12-08