1.1 本规范涵盖了解决系统和结构相互作用的适航性要求。该材料是通过通用航空领域国际专家的公开共识开发的。这些信息是通过关注普通类飞机创建的。内容可能更广泛地适用；申请人有责任证明更广泛的适用性作为一种具体的合规手段。 1.2 打算提出该信息作为设计批准合规手段的申请人必须寻求其各自监督机构的指导（例如，适用民航局（CAAs）发布的关于其可接受使用和应用的指导）。 有关监督机构已接受本规范（全部或部分）作为符合其监管要求（以下简称“规则”）的可接受方式的信息，请参阅ASTM委员会F44网页（www.ASTM.org/Committee/F44.htm）。 附件A1 将符合ASTM标准的方法映射到EASA CS-23，修改件5或更高版本，以及FAA 14 CFR第23部分，修改件64或更高版本。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers the airworthiness requirements that address the interaction of systems and structures. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Normal Category aeroplanes. The content may be more broadly applicable; it is the responsibility of the applicant to substantiate broader applicability as a specific means of compliance. 1.2 An applicant intending to propose this information as Means of Compliance for a design approval must seek guidance from their respective oversight authority (for example, published guidance from applicable Civil Aviation Authority (CAAs)) concerning the acceptable use and application thereof. For information on which oversight authorities have accepted this specification (in whole or in part) as an acceptable Means of Compliance to their regulatory requirements (hereinafter “the Rules”), refer to the ASTM Committee F44 web page (www.ASTM.org/COMMITTEE/F44.htm). Annex A1 maps the Means of Compliance of the ASTM Standards to EASA CS-23, amendment 5, or later, and FAA 14 CFR Part 23, amendment 64, or later. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.