BS EN 1765:2016规定了四种吸油和排油软管的特性 用于输送石油（包括原油和其他液态石油产品）的组件 含有最高50%（v/v）的芳烃。不适用于液化石油气和天然气 天然气。本文件中的软管组件可在-20°C至82°C的温度范围内使用。规定的软管尺寸范围为标称孔径50至500，可以是光滑孔径、粗孔径或 装甲粗炮。用于芳烃含量大于50%（v/v）的石油产品的软管位于外部 本文件的范围，但这些要求可作为此类软管的基础，应 制造商交叉引用:EN 14420-2EN 14420-3EN 14420-4EN ISO 1402ISO 1402EN ISO 1460ISO 1460EN ISO 1461ISO 1461EN ISO 7233ISO 7233EN ISO 8031:2009ISO 8031:2009EN ISO 8033ISO 8033EN ISO 8330: 2014ISO 8330:2014EN ISO 15614-1:2004ISO 15614-1:2004ISO 1431-1ISO 1817ISO 4649ISO 7005-1ASME B.1.20.1BS 3592-1EN ISO 2063ISO 2063购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN 1765:2016 specifies the characteristics of four types of oil suction and discharge hose assemblies used for the conveyance of petroleum, including crude oils and other liquid petroleum products containing a maximum aromatics content of 50 % (v/v). It is not suitable for liquefied petroleum gas and natural gas.Hose assemblies to this document can be used in the temperature range -20 °C to 82 °C.The hoses specified are in the size range of nominal bore 50 to 500 and may be smooth bore, rough bore or armoured rough bore.Hoses for use with petroleum products having an aromatic content greater than 50 % (v/v) are outside the scope of this document but the requirements may be used as a basis for such hoses on request to the manufacturer.Cross References:EN 14420-2EN 14420-3EN 14420-4EN ISO 1402ISO 1402EN ISO 1460ISO 1460EN ISO 1461ISO 1461EN ISO 7233ISO 7233EN ISO 8031:2009ISO 8031:2009EN ISO 8033ISO 8033EN ISO 8330:2014ISO 8330:2014EN ISO 15614-1:2004ISO 15614-1:2004ISO 1431-1ISO 1817ISO 4649ISO 7005-1ASME B.1.20.1BS 3592-1EN ISO 2063ISO 2063All current amendments available at time of purchase are included with the purchase of this document.