1.1 本规范涵盖了飞机适航性和设计的机组人员接口方面的国际标准。“机组人员”包括飞行机组人员和维修机组人员。该材料是通过通用航空领域国际专家的公开共识开发的。这些信息是通过关注普通类飞机而创建的。内容可能更广泛地适用；申请人有责任证明更广泛的适用性作为一种具体的遵守手段。 1.2 打算将这些信息作为设计批准的合规手段的申请人必须就其可接受的用途和应用向其各自的监督机构寻求指导（例如，适用的CAA发布的指导）。 有关监督机构已接受本规范（全部或部分）作为其监管要求（以下简称“规则”）可接受的合规手段的信息，请参阅ASTM委员会F44网页(https://www.astm.org/COMMITTEE/F44.htm). 1.3 单位- 本文件可能以国际单位制、英语工程单位或两者兼有的形式提供信息。每个系统中规定的值不一定是精确的等效值；因此，为了确保符合标准，每个系统应独立使用，并且两个系统的值不应合并。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers international standards for the crew interface aspects of airworthiness and design for aircraft. “Crew” includes flight crew and maintenance crew. The material was developed through open consensus of international experts in general aviation. This information was created by focusing on Normal Category aeroplanes. The content may be more broadly applicable; it is the responsibility of the applicant to substantiate broader applicability as a specific means of compliance. 1.2 An applicant intending to propose this information as Means of Compliance for a design approval must seek guidance from their respective oversight authority (for example, published guidance from applicable CAAs) concerning the acceptable use and application thereof. For information on which oversight authorities have accepted this specification (in whole or in part) as an acceptable Means of Compliance to their regulatory requirements (hereinafter “the Rules”), refer to ASTM Committee F44 web page (https://www.astm.org/COMMITTEE/F44.htm). 1.3 Units— This document may present information in either SI units, English Engineering units, or both. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.